Fitting A pillar trims .


M

Majima

Member
Joined
Oct 6, 2021
Messages
46
Car(s)
Fn2 civic Type R
Hi spent about 2 hours trying to fit the A pillar trims in my EK and I can't for the life of me get them to fit properly. The top bit along the roof lining clips in fine but the part that runs down the side of the windscreen just won't play ball I can't get it to clip in and there's an annoying gap . Is there any trick/technique to get the buggering thing to go on properly.
 
There is no clips at the very edges along the windshield. I have removed this pillar many times for security system modding, and I have always inserted the lowest part at the dash first and then smacking the trimming along the way up with my hands for the clips. Make sure there's no wires that are blocking the clip areas but I have a good feeling that you might have broken or missing clips.
 
Michael Flare said:
There is no clips at the very edges along the windshield. I have removed this pillar many times for security system modding, and I have always inserted the lowest part at the dash first and then smacking the trimming along the way up with my hands for the clips. Make sure there's no wires that are blocking the clip areas but I have a good feeling that you might have broken or missing clips.
Click to expand...

Thanks man I tried that it worked a treat and i have them fitted in properly now
 
You must log in or register to reply here.
Back
Top