Zen
Member
- Joined
- Jun 20, 2007
- Messages
- 410
With a little extra time to myself over the christmas period I've had a go at refurbishing my Oem Ek9 Wheels and so far so good I think.
Tools used for this operation.....Nitro mors paint stripper, Wire wool, fairy liquid, masking tape, Plasticote Matt black spray paint and meguiars nxt All metal polish. (I'll exlude lots of patience and the numerous bottles of Theakstons Old Peculier real Ale as this is the norm for me anyway)
Ok, I took the wheels down to the bare alloy and masked off the outer lip and area up to the spokes and sprayed with a few coats of paint.
After removing the masking tape i have treated with metal polish but want to know if I should laquer or leave as is ???
Can anyone help me out here ??
Cheers
Tools used for this operation.....Nitro mors paint stripper, Wire wool, fairy liquid, masking tape, Plasticote Matt black spray paint and meguiars nxt All metal polish. (I'll exlude lots of patience and the numerous bottles of Theakstons Old Peculier real Ale as this is the norm for me anyway)
Ok, I took the wheels down to the bare alloy and masked off the outer lip and area up to the spokes and sprayed with a few coats of paint.
After removing the masking tape i have treated with metal polish but want to know if I should laquer or leave as is ???
Can anyone help me out here ??
Cheers