FreakyParts
Member
- Joined
- May 7, 2010
- Messages
- 845
Hi Guys
I've been asked and asked about running this group buy, and finally got around to sorting the prices out for you guys.
All the spacers are designed to fit the hub of the car in question perfectly, with the correct centrebore and PCD, and are machined from high quality aluminium.
We can produce spacers to fit any car, not just limited to the EK9, so if you have a different marque, let me know and I'll check the price (it should be the same)
There are 3 different styles available.
1. Slot on. These spacers just slot over your existings studs and allow the wheel to locate on the original centrebore. Max size is 4mm (if you want thinner than 4mm, the price will be reduced accordingly).
2. Hubcentric Slot on. Again, these spacers slot over your existing studs and have a lip machined into the spacer to locate the wheel onto. Most cars will require longer wheel studs to fit these. If you're unsure, please ask. They can be made upto 20mm.
3. Bolt on. These spacers completely cover the existing studs (so start at 27mm) and have new studs to bolt your wheel onto. Again they have a lip machined into the spacer to locate your wheel onto.
Sizes quoted are per spacer, and price quoted is per pair (so, 2x4mm spacers will give you an increase of 8mm overall).
4mm(Slot on) - £25.00 + £5.00 P&P
10mm(Hubcentric) - £45.00 + £8.50 P&P
27mm(Bolt-on) - £55.00 + £8.50 P&P
30mm(Bolt-on) - £57.50 + £8.50 P&P
35mm(Bolt-on) - £60.00 + £8.50 P&P
40mm(Bolt-on) - £62.50 + £8.50 P&P
45mm(Bolt-on) - £65.00 + £8.50 P&P
50mm(Bolt-on) - £67.50 + £8.50 P&P
(P&P is for UK only, please contact me if you're outside of this)
If you buy 4 or more spacers, I will offer free UK P&P.
I've been asked and asked about running this group buy, and finally got around to sorting the prices out for you guys.
All the spacers are designed to fit the hub of the car in question perfectly, with the correct centrebore and PCD, and are machined from high quality aluminium.
We can produce spacers to fit any car, not just limited to the EK9, so if you have a different marque, let me know and I'll check the price (it should be the same)
There are 3 different styles available.
1. Slot on. These spacers just slot over your existings studs and allow the wheel to locate on the original centrebore. Max size is 4mm (if you want thinner than 4mm, the price will be reduced accordingly).
2. Hubcentric Slot on. Again, these spacers slot over your existing studs and have a lip machined into the spacer to locate the wheel onto. Most cars will require longer wheel studs to fit these. If you're unsure, please ask. They can be made upto 20mm.
3. Bolt on. These spacers completely cover the existing studs (so start at 27mm) and have new studs to bolt your wheel onto. Again they have a lip machined into the spacer to locate your wheel onto.
Sizes quoted are per spacer, and price quoted is per pair (so, 2x4mm spacers will give you an increase of 8mm overall).
4mm(Slot on) - £25.00 + £5.00 P&P
10mm(Hubcentric) - £45.00 + £8.50 P&P
27mm(Bolt-on) - £55.00 + £8.50 P&P
30mm(Bolt-on) - £57.50 + £8.50 P&P
35mm(Bolt-on) - £60.00 + £8.50 P&P
40mm(Bolt-on) - £62.50 + £8.50 P&P
45mm(Bolt-on) - £65.00 + £8.50 P&P
50mm(Bolt-on) - £67.50 + £8.50 P&P
(P&P is for UK only, please contact me if you're outside of this)
If you buy 4 or more spacers, I will offer free UK P&P.
Last edited: