Help fitting intake!!!


R

r44ootgrant

New Member
Joined
Dec 18, 2011
Messages
26
I have just bought a d16z6 intake manifold for my ej9(d14a2) and I'm not sure ov how the fitment goes as it's off a vtec

Any help would be much appreciated

Cheers
 
It all bolts together all you need to do is cut and rewire your IACV conector,

You need:

D16 IACV
D16 throttle cable + bracket
 
Jimbo said:
It all bolts together all you need to do is cut and rewire your IACV conector,

You need:

D16 IACV
D16 throttle cable + bracket
Click to expand...

The throttle cable came with it mate. Feel daft askin but wats the IACV mate lol will I have to take the solenoid off aswell?
 
Idle air control valve.

D14 uses a rotary control valve
D16 uses a linear control valve.

The D14 one can't be used as its a different shape.
 
i´ve done that mod so many times...

you´ll need : intake , throttle rotor ( from Z6 TB) and bracket that angs the cable to adjust the lag. need some plate to close the iacv behind the intake . Use the EJ9 TB. Need some water hose to re-root new coolant line to the TB..

and just puck all togheter...you´re done
 
Beavis said:
i´ve done that mod so many times...

you´ll need : intake , throttle rotor ( from Z6 TB) and bracket that angs the cable to adjust the lag. need some plate to close the iacv behind the intake . Use the EJ9 TB. Need some water hose to re-root new coolant line to the TB..

and just puck all togheter...you´re done
Click to expand...

Would the throttle body off the d16 not be better mate? Iv got the d16 throttle body with it
 
Sorry for the hijack but I've just recently attempted this mod. I've managed to get the manifold on and all the sensors but I have a problem with the coolant hose directly underneath the middle of the manifold that is connected to the cylinder head. I don't know where it should go as I've been losing a lot of water because of it and need help locating the right place for it. If anyone can help I'd really appreciate it.
 
You must log in or register to reply here.
Back
Top