Yeh bought the jenveys new a few years ago now. They are a nice bit of kit but were very expensive at the time. With the skunk2 cams and the jenvey itb's I gained around 15-20bhp mid range with a very flat power curve for a b16 but not a lot top end power!
Progress is slow and steady! got the radiator brackets mounted up and the radiator in. fitment is ok but it does touch at the top corners so will have to put a bit of rubber in between to cushion it
Also fitted the clutch/brake fluid reservoirs plate
finished off laying out the interior, pic is a bit rubbish but basically made a switch box out of part of the dash. I will have this flocked before I is put in and cut a panel out of carbon to screw to the front for the switches. Also got the extinguisher bracket and foot rest positioned so I wont have to drill many holes once the inside is painted
Started sticking on the exhaust heat shield. Made a slight mess of it but should do the job, the material isn't as flexible as I thought it would be so is quite tricky to get it to stick round all the curves of the floor pan!
Well after a busy few months I am finally back on with the build! I have primed the outside of the car and top coated the inside, wasn't a very pleasant job to do as the car is so small but turned out fairly good considering it was the first time I have sprayed a cage