Techy
The Geek
- Joined
- Jul 22, 2007
- Messages
- 766
I probably won't wind up doing it myself but I'm going to attempt to install cruise control on B16A2 Swapped 96 Civic CX (EJ6). I managed to come across a cruise control unit and switches for 96-00 Civics and figured why not.
I would like to know everything necessary for installing the Cruise Control. As I said, I have the unit and switches. I missing all the wiring however. I do have a wrecked 95 Civic EX Coupe (EJ1) that still has all that cruise stuff in it and I figured maybe I could use the wiring from it. If the plugs are different, well, I'm pretty good a rigging wiring so that's not too much of a problem.
So if someone could tell me everything necessary to install it and, heck maybe even some instructions on installing it if it's easy enough, that'd be great. Thank you for any help.
*Note this is a USDM Civic with a USDM B16A2 engine and P2T ECU, and probably later down the road it will be running a USDM OBD2A P30 ECU.
I would like to know everything necessary for installing the Cruise Control. As I said, I have the unit and switches. I missing all the wiring however. I do have a wrecked 95 Civic EX Coupe (EJ1) that still has all that cruise stuff in it and I figured maybe I could use the wiring from it. If the plugs are different, well, I'm pretty good a rigging wiring so that's not too much of a problem.
So if someone could tell me everything necessary to install it and, heck maybe even some instructions on installing it if it's easy enough, that'd be great. Thank you for any help.
*Note this is a USDM Civic with a USDM B16A2 engine and P2T ECU, and probably later down the road it will be running a USDM OBD2A P30 ECU.