ITR full length Rad

[phizal]

Will this bolt straight into a ek4 b16? and any gains?

 

[kellsled]

have to move one of the bottom holders but thats it and yes good gains

 

[tama666]

Will this bolt straight into a ek4 b16? and any gains?

no and no unless racing at high rpms for long periods of time.

 

[stoo.c]

I cant see much point in swapping at all to be honest. You wont gain anything from it. If you're going to swap rads for a greater coling capacity then get a larger core ally rad.

 

[Wilson1987]

The standard b series rad can take some abuse and handle pretty high temps so i wouldnt go with the idea mate. Obviously if your racing or live in vtec 24/7 then could be a possibility

 

[phizal]

Was just wondering as I've seen a couple EK4's with them. But thanks!

 

[tama666]

Was just wondering as I've seen a couple EK4's with them. But thanks!

I am installing one to get better cooling.
you can also use a duel core radiator from Mishimoto or Koyo., this way you do not need to relocate your rad brackets.

 

[Ally138]

been thinking about the same idea as it's the cheaper to source a dc2 radiator.. here's an old thread i found, should use the search bar

http://www.ek9.org/forum/engine/18952-dc2-rad-ek.html

looks like you'll be needing some welding done!