Jack24
Member
- Joined
- Sep 13, 2011
- Messages
- 801
Item for sale:K20/K24 engine with facelift flywheel and clutchmasters fx100 clutch
Reputation: http://www.ek9.org/index.php?threads/jack24.44568/
Price: £2000 + postage and paypal fees
Paypal: Yes
Location: Barrow-in-Furness, Cumbria
Condition: Very good
Description: K20A2 head, cams, inlet, throttle body (missing some sensors) on a K24A3 block. The head had CPL racing valve stem oil seals fitted, a new K24A3 headgasket, timing chain and tensioner when it was put togther along with a low mileage K20a oil pump that was stripped, inspected and cleaned. The block was from a 2.4 accord auto on 79,000 when i bought it. It will now have covered around 86,000. A new water pump was also fitted before i installed the engine into EK9.
I have relaced most of the sensors with new OEM honda items during my ownership all of which are inlcuded in the sale. There are a couple missing from the throttle body but apart from that it is ready to go. The starter motor and alternator are also included in the sale.
The engine comes with a lighter facelift EP3 flywheel and a clutchmasters FX100 clutch which has covered approx 7000 miles since it was fitted on this engine and worked great. I purchased that from CPL at a cost of nearly £400.
I will include a dc5 engine loom however it is missing the coolant temp plug from memory. Also the engine is missing the idler pulley and alternator belt as i had power steering fitted to it.
Also the engine comes ready fitted with the K24 CRV mount that is on world wide back order. I will not sell this separately.
Pictures:
Item for sale: K20A2 gearbox with m factory LSD, carbon lined syncros and hardened syncro hubs
Reputation: http://www.ek9.org/index.php?threads/jack24.44568/
Price: £850 + postage and paypal fees
Paypal: Yes
Location: Barrow-in-Furness, Cumbria
Condition: Very good
Description: K20A2 gearbox with m factory LSD, carbon lined syncros and hardened syncro hubs. This cost a lot more to build! Covered 7000 miles and worked perfectly in my K24 EK9. Steve from grinspeed fitted all the parts. The last picture is the box the diff came.
Pictures:
Item for sale: Clutch masters Ultra lightweight flywheel
Reputation: http://www.ek9.org/index.php?threads/jack24.44568/
Price: £125 postage and paypal fees
Paypal: Yes
Location: Barrow-in-Furness, Cumbria
Condition: Very good
Description: Clutch masters Ultra lightweight flywheel. Covered 7000 miles and was bought new from mybrid racing
Pictures:
Reputation: http://www.ek9.org/index.php?threads/jack24.44568/
Price: £2000 + postage and paypal fees
Paypal: Yes
Location: Barrow-in-Furness, Cumbria
Condition: Very good
Description: K20A2 head, cams, inlet, throttle body (missing some sensors) on a K24A3 block. The head had CPL racing valve stem oil seals fitted, a new K24A3 headgasket, timing chain and tensioner when it was put togther along with a low mileage K20a oil pump that was stripped, inspected and cleaned. The block was from a 2.4 accord auto on 79,000 when i bought it. It will now have covered around 86,000. A new water pump was also fitted before i installed the engine into EK9.
I have relaced most of the sensors with new OEM honda items during my ownership all of which are inlcuded in the sale. There are a couple missing from the throttle body but apart from that it is ready to go. The starter motor and alternator are also included in the sale.
The engine comes with a lighter facelift EP3 flywheel and a clutchmasters FX100 clutch which has covered approx 7000 miles since it was fitted on this engine and worked great. I purchased that from CPL at a cost of nearly £400.
I will include a dc5 engine loom however it is missing the coolant temp plug from memory. Also the engine is missing the idler pulley and alternator belt as i had power steering fitted to it.
Also the engine comes ready fitted with the K24 CRV mount that is on world wide back order. I will not sell this separately.
Pictures:
Item for sale: K20A2 gearbox with m factory LSD, carbon lined syncros and hardened syncro hubs
Reputation: http://www.ek9.org/index.php?threads/jack24.44568/
Price: £850 + postage and paypal fees
Paypal: Yes
Location: Barrow-in-Furness, Cumbria
Condition: Very good
Description: K20A2 gearbox with m factory LSD, carbon lined syncros and hardened syncro hubs. This cost a lot more to build! Covered 7000 miles and worked perfectly in my K24 EK9. Steve from grinspeed fitted all the parts. The last picture is the box the diff came.
Pictures:
Item for sale: Clutch masters Ultra lightweight flywheel
Reputation: http://www.ek9.org/index.php?threads/jack24.44568/
Price: £125 postage and paypal fees
Paypal: Yes
Location: Barrow-in-Furness, Cumbria
Condition: Very good
Description: Clutch masters Ultra lightweight flywheel. Covered 7000 miles and was bought new from mybrid racing
Pictures:
