'kammy11' em1 (UPDATED 27/5/15

[AzAc54]

Looking good man, sure you've got plenty lined up for this just like the EJ Bet you're loving vtec haha, remember you saying about the Recaros you were like a big kid at christmas square plates would set it off even more id say, but as you said before you dont want hassle from the fuzz lol

 

[Rossco155]

Get seat covers man!!

 

[kammy11]

S'up! Not updated this in a while, as a lot of you guys will know been a bit of a nightmare first wee while with the em1 but that is me back on my feet
Gave the car a good wash today, going up and down the motorway everyday isn't ideal for keeping her clean!

I'll shut up and let the pictures do the talking (excuse crappy iPhone pics)

Somebody had hit my car in Asda the other week so had to get my front bumper resprayed, impact was in the corner. Happy with the outcome

I got sick and tired of the same old cluster as I had basically the identical one in my ej9 and didn't like the idea and price of getting a new cluster (ek9) and mess up the mileage, so got this oem honda bezel

Thought the rear end was a bit twitchy at times so decided to try and sort that out. Went along the round of dc2 anti-roll bar, BWR lca's and ASR subframe brace

Finally decided to tidy up the engine bay! Gave it a good clean and got myself some PWJDM goodies and a new rocker cover courtesy of Ross (RD55 DUN)... top guy!

Comments and criticisms welcome. Not really sure what's next, I've got a USDM recess to go on to allow import plates on the rear apart from that now sure. Any ideas would be welcome

 

[Jimbo]

Looking good dude, keep it up

 

[LittleGeo]

looks sweet pal

 

[rd55 dun]

Cover looks great with your red nuts! Really does freshen up the engine bay (if I say so myself haha )

 

[Bushell]

Cars lookin real good buddy, will look better once you de spoiler if your still going down that route. Loving the shiny bits at the rear aswell. Only things I would do is a change of wheels and more lows, but that's my opinion

 

[Ally138]

All dat bling bling

 

[ramboteamjon]

Lovely looking coop mate!!

 

[kammy11]

Cheers for the comments guys!

Ross the engine bay is looking much better now compared to when I got it could be doing with a good detail clean tho

Chris I am looking for new wheels but not sure what to go for! I really want rpf1's but who doesn't eh? as for lows not really practical because I scrape getting to my house if I don't go 1mph I will just leave it as it is I think spoiler I am 50/50, might get a Mugen one

 

[frank_eg]

looking good man, 196hp is awesome for a b16

 

[AzAc54]

Looking good as per usual dude! Shame about the p***k who hit your car! At least its all sorted now, get those import plates on im still waiting

 

[kammy11]

Right guys, I've not updated this in ages to bare with me. Had a few people on at me to update this so I apologise in advance. I will try let the pictures do the talking

I'll start off with the inside, I had always wanted an ep3 steering wheel and managed to pick myself up a tacky one for £20 and thought I would try and restore it...
BEFORE

AFTER

I then went onto buy EK9 pop out cupholders, DC2 floor mats and then a BuddyClub Dual Bend Short Shifter...

My Recaro had busted underneath and managed to get myself a new netting thing from Capital Seating which was a relief because I had not long bought them haha

After a while I eventually decided to bite the bullet and get myself a set of decent coilovers, HSD MonoPro's!

After plenty seized bolts and old parts that were gubbed we eventually got them on. Also Had to replace lower ball joints and track rod ends both sides :/ Then I got myself a set of BWR Upper Camber Arms but unfortunately I can't find pics of them
FINISHED!

As you can see I also bought myself a set of Rota Slips, got them for cheap cheap with good tyres so couldn't say no. They will be getting refurbed as I hate the chrome lip! Car was a bit low for my street so was raised slightly!

 

[kammy11]

With winter coming up I decided to give my car a service, 4 new tyres, undersealed and refurbish the brakes. I rebuilt calipers front/rear as well as new pads front/rear!

Undersealing before/after pics...
BEFORE

AFTER

I didn't take much pics when fitting the brakes because the weather was brutal but here is one of them done and calipers painted
Mtec grilled/Drooved discs with EBC pads

After this is kinda went quiet I took off the slips for the winter and got the old alloys refurbed, EK9'd my headlights and bought a Spoon Sports Sun Visor

BEFORE

AFTER

Headlights...

Anyway yous will be glad to hear that's me done! Plans for the future are just to keep it clean and refurb the rotas' in a different colour then get them on when the weather is better, let me know what colour yous think!
Here are some pics of how it stands...

Thanks for listening! Comments and Criticisms welcome as always

 

[AzAc54]

Good to see you updating this again dude, cars looking good and real clean. Id go for a bronze colour on the wheels as a next choice but thats just me

 

[Bushell]

Good wee update mate. Car looks loads better with the coilovers fitted. Think you will already know what colour i would pick for the slips.... white haha.

 

[kammy11]

Good to see you updating this again dude, cars looking good and real clean. Id go for a bronze colour on the wheels as a next choice but thats just me

Thanks man, was trying to calm down with it off late to be honest. Kinda worked but as you know I am always likely to buy something haha Still unsure on the colour man but thats a while off yet quite like these wheels lol

Good wee update mate. Car looks loads better with the coilovers fitted. Think you will already know what colour i would pick for the slips.... white haha.

Thanks bro! Gonna need to nip down and see yous soon white or silver seem to be the two front runners for the colour though son

 

[Bushell]

Ahem....update?

 

[kammy11]

Right, had a few of yous ask me to update this as I've not updated it in a while! I'll write a wee spec update then just let the pictures do the talking
Full front end respray/rear bumper respray
USDM rear plate recess and USDM plate
Carbon wrapped fog lights
UDSM crystal rear lights
Slips painted in white
Sand/Buff Headlights
OEM SiR Grille

Comments welcome!

 

[LittleGeo]

looks cool man!