Master cylinder HELP

[martyv]

changing my car to 5 stud ek9 it an 1.4i car to start with
which master cylinder an brake sevro should i put on the ek9 or the dc2
one or is there any or honda prelude,honda accord ones maybe the same as the ek9 or dc2

OR WAT about the b18c6 civic would that be the same anyone know

 

[tama666]

changing my car to 5 stud ek9 it an 1.4i car to start with
which master cylinder an brake sevro should i put on the ek9 or the dc2
one or is there any or honda prelude,honda accord ones maybe the same as the ek9 or dc2

OR WAT about the b18c6 civic would that be the same anyone know

Just upgrade your master to the CTR or ITR [1 inch master]. Leave the servo alone as they are all the same for the most part, more importantly they are compatible. I would encourage you to upgrade the pads, brake fluid and install stainless steel brake hoses while you are at it.

 

[martyv]

Just upgrade your master to the CTR or ITR [1 inch master]. Leave the servo alone as they are all the same for the most part, more importantly they are compatible. I would encourage you to upgrade the pads, brake fluid and install stainless steel brake hoses while you are at it.

thanks mate so will jst change my master cylinder then

 

[highfive]

good luck.