Over Heating EJ6 Hatchy AKA EK Hatchy


JDMCivic

EJ-SPEC
Joined
Jan 22, 2010
Messages
119
Ok I Got A Brand New OEM Thermostat From Honda. And I Replaced It Last Week. And I Replaced The Fan Switch Even Tho It Was Working. And Today It Started Doing The Same **** Again. Still Over Heating. Now What I Don't Get Is If I Hold The Motor At 4k. The Thermostat Gauge Flyies Down Back To Normal. Could It Be That The WaterPump Is Going Bad???? And BTW The WaterPump Does Not Leak AnyThing...
 
Hummm, can you tell us more about your current setup?
How old and what is your radiator brand now?
How old is your water pump? Even if its not leaking how old is it?
When was the last time you flushed the system properly?
When was the last time you replaced the head gasket?
 
you should check your rad pipes when its warm to see if there hard or not,if they are then thermostate mite be sticking or system needs re-bled
 
Hummm, can you tell us more about your current setup?
How old and what is your radiator brand now?
How old is your water pump? Even if its not leaking how old is it?
When was the last time you flushed the system properly?
When was the last time you replaced the head gasket?

Well I Have Had The Car Since Last Year. And I Have Not Had A Promblem With Her. But Radiator Is OEM Stock. Never Been Replaced. From What It Looks Like. And I Don't Know How Old s Any Of The Parts. So What I'am Doing This WeekEnd Is Replaceing Everything Water Pump HeadGasket Timing Belt And Radiator. To See What Happends.
 
you should check your rad pipes when its warm to see if there hard or not,if they are then thermostate mite be sticking or system needs re-bled

What I'am Doing This WeekEnd Is Replaceing Everything Water Pump HeadGasket Timing Belt And Radiator. To See What Happends.
 
What's the point in replacing the head gasket without knowing what's wrong? Sounds like a massive waste of money to me, throwing money at problems does not always fix them.
 
When you put your heaters on does the temperature go down ? What fan are you running and is it on the back or front of your rad ? Leave your headgasket alone.
 
What's the point in replacing the head gasket without knowing what's wrong? Sounds like a massive waste of money to me, throwing money at problems does not always fix them.

The Only Reson I Replaced The Head Gastket Is Because I Put A VTEC Head On.
 
Back
Top