Plug-n-play resistor box harnes(ek models only!!!!!!!!!!)


medjosh6

medjosh6

Member
Joined
Aug 9, 2008
Messages
288
I have for sale a plug-n-play resistor box for ek(96-00) only.dont waste your time hacking your harness up or trying to figure the wiring out.keep it simple with the harness i've made.all you have to do is unplug the grey dead plug and plug this in.if you want to remove it,just unplug.every wire has been soldered and shrunk-wrapped,then taped up and wire loomed and once more taped up.made it a little long so it can bolt up to your firewall.price is $50+ shipping and paypal fees.i can get a basic shippng fee if done by usps.resistor is also included.will have pics up later.

IF YOU HAVE LO-IMPEDANCE INJECTORS.....YOU KNOW YOU NEED THIS!!!!

CHEERS TO ALL

PICS:

HERE IS THE 14 PIN PLUG
DSC06908.jpg

DSC06923.jpg


THIS PIC IS SHOWING FEMALE AND MALE 14 PIN PLUGS
DSC06916.jpg

DSC06914.jpg


THIS ONE IS THE RESISTOR PLUG
DSC06919.jpg

DSC06925.jpg


HERE ARE OPPOSITE ENDS AND COMPLETE HARNESS:
DSC06912.jpg

DSC06910.jpg

DSC06928.jpg


PICS OF NEW HARNESS:
IMAG0523.jpg

IMAG0522.jpg

IMAG0521.jpg


RESISTOR BOX:
IMAG0526.jpg

IMAG0525.jpg


FOR EG,DELSOL:
IMAG0527.jpg

IMAG0528.jpg

IMAG0529.jpg

THIS IS THE END THAT PLUGS INTO THE EG HARNESS:
IMAG0530.jpg
 
Last edited:
thank you oscarsayco.
basically if you run lo-impedance injectors without the resistor box,you will eventually burn your ECU.this allows you to easily plug in the resistor box without having to chop,splice,dice(fuk up)your engine harness.if you decide you want hi-impedance injectors or go back to stock,just un-plug the harness and replace the deadplug.there is no twist-tying,butt connectors here.everything is done the right way.
 
You must log in or register to reply here.
Back
Top