P Peebs988 New Member Joined Jun 22, 2013 Messages 21 Dec 1, 2013 #1 I have used the 282mm calipers off the 2.2 prelude it seems the carrier is rubbing against the disc, have i fitted them wrong or do they need modifing? cheers
I have used the 282mm calipers off the 2.2 prelude it seems the carrier is rubbing against the disc, have i fitted them wrong or do they need modifing? cheers
Jimbo B18C-R Joined Oct 27, 2010 Messages 3,204 Dec 1, 2013 #2 The carriers have to be shaved down 2-3mm, then all will be good.
P Peebs988 New Member Joined Jun 22, 2013 Messages 21 Dec 1, 2013 #3 i thought so which part has to be shaved? is it where they mount to the hub or where the carrier touches the disc?
i thought so which part has to be shaved? is it where they mount to the hub or where the carrier touches the disc?
DB8 TYPER Active Member Joined Nov 1, 2006 Messages 428 Dec 1, 2013 #4 Or you can use 1.5mm washer between the knuckle and Carrier, take it you using 28mm disk
P Peebs988 New Member Joined Jun 22, 2013 Messages 21 Dec 1, 2013 #5 Itr disk, I have done the hub conversion but used prelude calipers. I'll try the washers for now sound mate
Itr disk, I have done the hub conversion but used prelude calipers. I'll try the washers for now sound mate
Ayepod Member Joined Aug 6, 2013 Messages 72 Dec 2, 2013 #6 I used washers between the knuckle and carrier, as menchioned above. Worked fine no need to grind away anything.
I used washers between the knuckle and carrier, as menchioned above. Worked fine no need to grind away anything.
Jimbo B18C-R Joined Oct 27, 2010 Messages 3,204 Dec 2, 2013 #7 Sorry I presumed you were running 4x100 thus using MG zs 282mm discs.
P Peebs988 New Member Joined Jun 22, 2013 Messages 21 Dec 2, 2013 #8 No worries dude should of stated the setup properly, sound peeps
