spec of the CTR fuel pump


K

k00Lric

New Member
Joined
Jul 11, 2007
Messages
56
Hi Guys,

Does anyone knows what's the spec of the stock CTR fuel pump? Like how many Litre per hour? And also what's the optimum fuel pressure for CTR fuel pump?

The reason i've changed to this fuel pump is becoz the current fuel pump is not functionally properly and its showing 2.3 bar on the fuel pressure gauge.

Also, I've got myself a HD fuel pump stated as 220 litre per hour. is this too much for a b16a wif CTR pistons, CTR cams?
 
My stock 1999 EK9 B16B came with 46 psi of fuel pressure factory default, and 2.3bar of fuel pressure is 33 psi, I think you're running lean, do you have bigger injectors ?
 
AAAAAAHHHHHHHHHHHHHHHHHHHH where is my post? i answered this quesion last night!!!! :angry2:
 
rvm said:
My stock 1999 EK9 B16B came with 46 psi of fuel pressure factory default, and 2.3bar of fuel pressure is 33 psi, I think you're running lean, do you have bigger injectors ?
Click to expand...

Hmmm, i think so. Coz i know that my emanage has been set 2 run abit lean on fueling but after i've changed to the HD fuel pump which is 220LPH, the pressure has gone up to 2.8 bar and i'm running on stock fuel injectors.

Is 220LPH fuel pump abit too much for my setup? b16a wif CTR pistons n CTR cams.
 
k00Lric said:
No problem, blinx. I will wait for your post again. Coz i'm seriously in doubts about the fuel pump that i have now.
Click to expand...

i basically said the same thing as RVM, since you have an aftermarket pump, you may want to purchase an adjustable FPR, this way you can set you fuel pressure to 46psi aka ~3.2 bar. 220lph is a little large for NA but it shouldent be a problem as long as you have a FPR to control it :nice:

i have a 220lph and i dont have any problems.
 
blinx9900 said:
i basically said the same thing as RVM, since you have an aftermarket pump, you may want to purchase an adjustable FPR, this way you can set you fuel pressure to 46psi aka ~3.2 bar. 220lph is a little large for NA but it shouldent be a problem as long as you have a FPR to control it :nice:

i have a 220lph and i dont have any problems.
Click to expand...

Thnx, blink. I will get 1 soon and also i'm getting a full set of EK9 intake manifold .
 
You must log in or register to reply here.
Back
Top