trouble with the B16A2


Figo

New Member
Joined
Nov 2, 2006
Messages
10
:mad: In '94 VTi im trying to get it to start but she just wont. The battery is fully charged and all that but it just wont go. Iv a suspicion that it might be the Leads leading to the spark plug thats failing it to spark. I turn the key and everything goes fine and it really wants to burst into life the Induction kit starts to occasionaly burble and everything but it just never actually starts up :(

it is Carbon Leads im using at the mo, could it be them? i know carbon ones can be iffy
 
well if you have fuel thro the injectors, and compression is fine - then spark is your problem.

If you know the leads could be dodgy then try replacing them 1st.
 
yeh think ill get some tomoz, try that out! let yall know what happens :p
 
I had the same problem!

The spark plugs had gasoline, I change all 4 and the car started without any problems let us know what happens.
 
change the spark plugs :)
 
I Have the same problem. I have spark, compression and fuel it till wont start!!!
 
the b16a2 is bad for the dizzy cap failing common fault with then replaced them on loads. sometimes still gives u a spark but at the wrong time try that new leads n plugs like everyone els is sayin good luck
 
pull out a lead, stick a spark plug in it, have a friend start the car and see if you have spark.
 
Ive b16b. I changed the plugs. It sparks so U say it myt be distributor??
iumek?
 
Ive b16b. I changed the plugs. It sparks so U say it myt be distributor??
iumek?

yup thats what i would be changing. its prob worn and sparkin at the wrong time. distributor and rotor arm. are u sure its gettin fuel
 
Back
Top