white Ek4 SiR SpoonSports build
- Thread starter Adris civic
- Start date
Adris civic
JDM ADDICT
- Joined
- Mar 13, 2010
- Messages
- 50
thanks dude! much more to come, i'll be making it RHD again by the end of this year!Big fan of this car, looks good with both front bumpers on! Can't go wrong with a spoon build!
Adris civic
JDM ADDICT
- Joined
- Mar 13, 2010
- Messages
- 50
i started parting out so i can buy the new set up
Adris civic
JDM ADDICT
- Joined
- Mar 13, 2010
- Messages
- 50
UPDATES:
Bought a B18 engine ( and returned it because of internal defects)
so what we did was to get my engine into a 0km state:
All new ( seals, gaskets, babis, piston rings, and new double valvesprings)
we decided to bore a bit the block so we went from a 81.00 spec to a 82.00 spec
new high compression type R pistons
98 spec ITR camshafts
96 spec Ek4 vtec solenoid
Ek4 intake manifold
i also bought new belts because the other ones were deteriorating
New header
And a jasma exhaust (will have to mod the pipe to fit in the ek)
New set of tires
Exedy clutch
also installed the Spoon L.S.D
we changed the old Chipped P28 ECU to a P73 ECU so i wouldn't have to re-map
i got my hands on a Bride Zeta II bucket seat in 9.5/10 condition
a Momo Race steering wheel
and a (discontinued) Spoon sports damper ( to which i'll have to find base set or just use a NRG damper's bases.
SOLD MY OEM BUMPERS.
And will sell my rear track bumper, looking to get my hands on a rear Air Walker one, on which i'm being helped by Yamamoto-san, the guy who won the 1998 super taikyu with the Gathers ek9, featured in gran turismo 4!!!
Also looking for a set of ganador super style mirrors for EK ( just for the record, ganador never made them, the ones for ek are either adapted or fake) [but i just want a set for the lulz] . (Wish me luck, cause that's like finding a doo doo bird...)
Will upload pictures later and when i get the new bumper and the ganadors (if i find them) i'll paint the whole car and post some rad pics
Bought a B18 engine ( and returned it because of internal defects)
so what we did was to get my engine into a 0km state:
All new ( seals, gaskets, babis, piston rings, and new double valvesprings)
we decided to bore a bit the block so we went from a 81.00 spec to a 82.00 spec
new high compression type R pistons
98 spec ITR camshafts
96 spec Ek4 vtec solenoid
Ek4 intake manifold
i also bought new belts because the other ones were deteriorating
New header
And a jasma exhaust (will have to mod the pipe to fit in the ek)
New set of tires
Exedy clutch
also installed the Spoon L.S.D
we changed the old Chipped P28 ECU to a P73 ECU so i wouldn't have to re-map
i got my hands on a Bride Zeta II bucket seat in 9.5/10 condition
a Momo Race steering wheel
and a (discontinued) Spoon sports damper ( to which i'll have to find base set or just use a NRG damper's bases.
SOLD MY OEM BUMPERS.
And will sell my rear track bumper, looking to get my hands on a rear Air Walker one, on which i'm being helped by Yamamoto-san, the guy who won the 1998 super taikyu with the Gathers ek9, featured in gran turismo 4!!!
Also looking for a set of ganador super style mirrors for EK ( just for the record, ganador never made them, the ones for ek are either adapted or fake) [but i just want a set for the lulz] . (Wish me luck, cause that's like finding a doo doo bird...)
Will upload pictures later and when i get the new bumper and the ganadors (if i find them) i'll paint the whole car and post some rad pics
Last edited:
Adris civic
JDM ADDICT
- Joined
- Mar 13, 2010
- Messages
- 50
By the way, i'm still selling my regamasters and 4x114 itr conversion, if i sell that i'm getting 5x114.3 ctr/itr conversion and sw388's