Will I need Spigot rings?

[y3Lo]

at some point I'll be fitting my new wheels, which have a centre bore of 58mm, will I need spigot rings for these?

thanks

 

[Darragh]

at some point I'll be fitting my new wheels, which have a centre bore of 58mm, will I need spigot rings for these?

thanks

Yes! You will need one thats 56.1mm inner diameter and 58mm outer diameter.

 

[goba]

Yes! You will need one thats 56.1mm inner diameter and 58mm outer diameter.

Im pretty sure that's just the Honda 4x100 hubs.

4x114.3 and 5x114.3 are 64.1mm.

Assuming the OP as EK9 hubs he may well need to get the wheels machined.

 

[ek9-Dez]

Yes! You will need one thats 56.1mm inner diameter and 58mm outer diameter.

quick question !, got an 2000 ek9 , and i got some wedsport wheels and the outter is 73.1 is the inner still going to be 56.1 as i will order that size

also are they really needed i can see what there for of course but what will happen if you dont run them ?

 

[Darragh]

quick question !, got an 2000 ek9 , and i got some wedsport wheels and the outter is 73.1 is the inner still going to be 56.1 as i will order that size

also are they really needed i can see what there for of course but what will happen if you dont run them ?

Yes 56.1mm for the inner diameter to suit the civic hub.

I doubt you will see anything happen unless you hit a kerb or pothole .. in an accident they maybe the difference in the wheel staying on or off the car

 

[Kipper]

quick question !, got an 2000 ek9 , and i got some wedsport wheels and the outter is 73.1 is the inner still going to be 56.1 as i will order that size

also are they really needed i can see what there for of course but what will happen if you dont run them ?

Also they reduce the strain on your stud's, I like thing's complete/finished so I always run them no matter what, make putting the wheel on slightly easier too

But in the sense of 2mm referring to the OP, it's entirely upto you, If you can get them in that size I would.

 

[ek9-Dez]

Yes 56.1mm for the inner diameter to suit the civic hub.

I doubt you will see anything happen unless you hit a kerb or pothole .. in an accident they maybe the difference in the wheel staying on or off the car

LAME my ek9 is 5x114.3 so i got the 56.1 and they didnt fit looks like im gonna have to try gobas attempt and go for 64.1 will let you know my outcome

 

[Darragh]

LAME my ek9 is 5x114.3 so i got the 56.1 and they didnt fit looks like im gonna have to try gobas attempt and go for 64.1 will let you know my outcome

Apologies.. I must have had the 4x100 hub in my head when I wrote that . You should be able to sell on those rings as many japanese wheels seem to be 73.1mm.

 

[type-r-dunk]

Don't worry too much just tighten each nut hand tight to make sure wheel is centred then torque up.
I never use them.
Dunx

 

[ek9-Dez]

Don't worry too much just tighten each nut hand tight to make sure wheel is centred then torque up.
I never use them.
Dunx

mmm i was thinking that but im a fussy bugger anyway i ordered a 64.1 yesterday at 12 and there here this morning off for a ride today so ill try them this after noon and wack a pic up then ill get a small build thred up