wire tuck ?s


turbowizard

turbowizard

if in doubt,flat out
Joined
Feb 22, 2010
Messages
61
a71bd0d2.jpg


What is the harness covered in? And for a rhd(dont no if it would make a difference in the wire harness) civic the harness would start on the right side(looking into the e-bay)and works its way across to the end of the gearbox?
Would be much appreciated:nice:
 
its braided cable sleeving. looks smart when used properly!
 
what sorta size u think is required, you think 14mm would be big enough?overkill?not enough?

oh and is there a specific sort of wire u have to use for extending parts?

Sorry for such novice ?s but im not good when it comes to electrical.
 
Last edited:
See how the lights harness(green line) goes all the way round the bay, from 1 corner right round to the other. When you do your tuck do you have to take the blue root or can you do the red?
I cant see how you do this when the lights harness goes from 1 corner to an other?

1.jpg
 
pm ramzy, he tucked his and sleeved it aswell he should know dimensions for sleeving
 
I didnt do the tuck myself, i got a friend to do it.

Youll need

- Sleeving, 6mm/ 10mm and 12mm (ebay)
- Heatshrink (ebay)
- Soldering iron and Solder
- Wires to extend the headlight looms and other wires
- Small screwdrivers to be able to de-pin the plug
- 2/3 Days


For the headlight looms you can re-route them around the bay through the wings
For the engine loom youll need to drill a hole big enough under the Main Airbag Ecu

Check out my build on civiclife.net for more pics/info

hope that helps mate
 
You alright Rams, who did you get to help you with your wire tuck? are they willing to help out on my car and how much they charging? lol
 
ramz do you have the link of the seller you bought your sleeving?
 
whats your build on civic life under?
see that pic i put up, does yours go the blue route or the red one?
 
Last edited:
right, i have figured out most of it, im just stuck with 1 wire or 2.

I have 2 blue/red wires and i no 1 of them is for the horn but i cant seet the other off the diagram.

PLEASE HELP im confused.com

also if some1 can point me to a good website to find the wire for this would be a great help. cant seem to find the right stuff round me.
 
Last edited:
a question about the abs fuse box,where you hide it?


and i mean a good place to hide it in the engine bay area not inside the car.
 
Last edited:
I believe most people reloate this into the passangers wing or in behind the glove box.
 
yes most plp that they do i was wonder if there is a easiest way to hide it inside the engine bay.
 
You must log in or register to reply here.
Back
Top