abunai civic (present)

[abunai888]

header took a nice color after the dyno session.
the small breather tank has some power steering oil to keep lubricating the rack since the p/s is deleted.
some an fitting and an empty amsoil bottle will do the job for the catch can for now...
removing weight needs you always to be inventing.

 

[Leej8]

You have an fittings on the bottle? Lol you going all out on the weight saving!

 

[abunai888]

brake update !
new pads rear i used ebc yellow and new replacement rotors at oem size ,caliper/rotors painted all in gold color
at front i used rover mg/zr rotors 4x100 282mm and crv calipers that i slightly grinded the inner sides that was touching the rotors nothing serious with hawk hp+ pads all painted gold color too there.
hel ss brake lines everywere and fresh ate fluid made the lightweight civic to brake as it should from factory !
sweet comparison pics between 262mm and 282mm rotors.
also tons of dust from hawks pads but no noise or any squeaks as many people complain.

 

[abunai888]

some service parts i'm gonna use in future
also give a try on ams oil mtf
not a big fan of it after i used it.

 

[abunai888]

some here and there pics

 

[Leej8]

You have her well kept, fair play pal .

 

[abunai888]

You have her well kept, fair play pal .

thanks for watching man !

 

[Leej8]

Thanks for sharing! Your car is built well.
And it's nice to see it getting better every time.

 

[abunai888]

seeking more power so i polished & ported an edm intake itr manifold

 

[abunai888]

added some length to the intake arm and replaced the aem dryflow filter with a shorter k&n.
on b series more intake arm length equals better powerband
around 80cm seem to work well for b18's but i dont like the cai desight due to hydrolock that's why i keep short ram intake.

 

[abunai888]

intake manifold installed.
some red silicon vacuum hoses for more funk !
also that with the cammarks at TDC is normal.

 

[abunai888]

weight in at 1030 kg with half the gas tank
the lightest it got was at 1010kg but with 1/4 fuel.
going lightweight is cheap horsepower !
but as i get older i want back my luxuries like power steering and less cabin noise lol.

 

[Leej8]

Great job on the inlet dude ! Can you notice any difference in the car with the port ? And intake?

 

[abunai888]

Great job on the inlet dude ! Can you notice any difference in the car with the port ? And intake?

didn't noticed something but made bigger difference with the remap.

 

[abunai888]

sold the 70mm exhaust and made a new 76mm
with big silencers and with no flanges.
the middle silencer is 40cm long wile the oval one is 32cm long this will help with noise.

 

[abunai888]

something to match up with the new color..

 

[Leej8]

Very nice dude !
A sound clip would be super!
That sun makes me mad lol, makes me miss living in Spain,
Ireland is a very depressing place in winter, very hard to
Work on your car ,
Love the update dude .

 

[abunai888]

Very nice dude !
A sound clip would be super!
That sun makes me mad lol, makes me miss living in Spain,
Ireland is a very depressing place in winter, very hard to
Work on your car ,
Love the update dude .

it seems like Greece has one of the best climate i have some friends having depression working over Germany lol
in mediterranean europe you can enjoy all 4 seasons but every place has it's beauty like Ireland has.
anyway here is a video

 

[Leej8]

it seems like Greece has one of the best climate i have some friends having depression working over Germany lol
in mediterranean europe you can enjoy all 4 seasons but every place has it's beauty like Ireland has.
anyway here is a video

Haha super! Rpm is very smooth and fast ,
Nice gear change too ! And rev matching,
Great video abunai888, car sounds so good keep up the
Good work mate .

 

[abunai888]

another winter
this time heavy snow and cold
car and me waiting patiently.