Harris_EK3
New Member
- Joined
- Nov 21, 2011
- Messages
- 392
Okay, swapped a b16a2 from my car (preface ek3) into my mates facelift ej9.
I'm using an obd2a loom and obd2a p73 that has been de-immobilised. This was working great in my car. Engine is originally from a preface vti.
Now this is what I'm getting:
Good spark
No fuel pump prime
No fuel to cylinder
No CEL
Turns overs fine.
All fuses okay.
I have a spare plug (dark grey) from the interior loom that was plugged into the d14 ecu. But I have nowhere to plug it into the p73.
Totally lost here guys, so any help appreciated.
Think I should have used a facelift loom and ecu!
I'm using an obd2a loom and obd2a p73 that has been de-immobilised. This was working great in my car. Engine is originally from a preface vti.
Now this is what I'm getting:
Good spark
No fuel pump prime
No fuel to cylinder
No CEL
Turns overs fine.
All fuses okay.
I have a spare plug (dark grey) from the interior loom that was plugged into the d14 ecu. But I have nowhere to plug it into the p73.
Totally lost here guys, so any help appreciated.
Think I should have used a facelift loom and ecu!