B18C - S80 - 5Zigen - AEM - Recaro


E2-SAW

B18 Green Machine
Joined
Mar 5, 2009
Messages
655
Feedback: http://www.ek9.org/forum/reputation-center/32340-e2-saw.html

ITEM FOR SALE: B18C Bottom End, rebuilt with EK9 Pistons

PRICE: £750

LOCATION: Edinburgh, Scotland

CONDITION: 9/10. used, but in perfect working order

DESCRIPTION:

B18C Bottom End from my girlfriends Del Sol which we have decided to break. Was fully rebuilt around 15k miles ago.

The crank was polished, ACL Race bearings and thrust washers fitted, and the pistons are oversize as well.

All gaskets/seals and the pistons/rings wree sourced through SimAuto.

I dont have any pictures of the bottom end on its own, but will get some ASAP. Its still fitted to the car, but head has been removed.

14629222.jpg


ITEM FOR SALE: ITR Cylinder Head

PRICE: £180

CONDITION: 7.5/10

DESCRIPTION:

UK Spec ITR Cylinder Head For Sale. I bought this from StevenEK9 earlier in the year to build up and use as a spare.

It is still fitted with all the valves, valve springs, retainers and also all the cam caps

Ideal cylinder head to get and rebuild for your own car and have ready to fit while still using your current engine.

no pics at the minute, StevenEK9 might have one, but i'll try get one over the weekend. Its a cylinder head, so you can pretty much figure out what it looks like.




ITEM FOR SALE: S80 4.4FD Gearbox

PRICE: £400

CONDITION: 8/10

DESCRIPTION:

Gearbox from a 96 Spec Integra Type-R. In fully working order, no noises or bangs from it, does not crunch in or out of any gear. 4.4 final drive.

No pictures of it on its own, but again, its a gearbox. Its the same one fitted to the enginebay in picture above




ITEM FOR SALE: 5Zigen Exhaust Manifold

PRICE: £325

CONDITION: 7.5/10

DESCRIPTION:

5Zigen Exhaust Manifold for B18 fitment. 2.5" collector. Used on my girlfriendws Del Sol which is currently being broken for parts.

Top quality product, JASMA stamped also. Could do with a polish/clean, but has very very minimal scrapes on the bottom of it, and no dents. Will have better pics of this next week once fully removed from the car.

09877da9.jpg


14629222.jpg





ITEM FOR SALE: AEM V2 Induction Kit

PRICE: £180

CONDITION: 9/10

DESCRIPTION:

Done very little mileage, about 2000 maximum. In great condition. Filter could do with a little clean up.

The gearbox mount and bobbin are not pictured, but are included.

This is made to fit an EG/Del Sol. I'm not sure how easy it would be to make it fit an EK or ITR, with a bit of initiative it may be easily achieveable

85dceb81.jpg


84beedb7.jpg





ITEM FOR SALE: Accord Type-R Recaro Seats

PRICE: £350

CONDITION: 9/10

DESCIPTION:

Pretty much as it says up there. Accord Type-R Recaro seats. In excellent condition. Rails are for a Del Sol. Fit the Del Sol perfectly

DSCF3078.jpg


31052010439.jpg


31601b5b.jpg


need a wee hoover but mint otherwise

59f7bed4.jpg


cd8b6c81.jpg


10099d8b.jpg


14c40a16.jpg




Prices do NOT include delivery. I'm in Edinburgh/Falkirk, Central Scotland

Any questions or enquirys, please PM me.

Cheers

Steve
 
No cams for sale. If there were cams for sale, they'd be advertised :)
 
Steve could be interested on the bottom end, Could you hold or have you got lots of interest on it? would you bring it to Glasgow too ?

Who built the bottom end?

Cheers
Viney
 
Last edited:
Alright Viney :)

Its not really been properly advertised, had some interest but nothing concrete. A small deposit would hold it though.

Aye could deliver to you no problem in Glasgow.

SOS built the bottom end up. This was originaly the bottom end in pimpinblackcivic's EK4 VTI-S (not sure if you will remember it).

I ended up with the car and put the engine into Amandas Del Sol earlier this year.

Cheers
 
Head is off a JDM car, hence why it only uses 2 studs on the exhaust side, rest are bolts

when i removed the cams they were in mint condition, looks like it was a low mileage head

:nice:
 
Steven, I'll have the head for a mate if he gives me the dosh.
 
Last edited:
hello i interesting for bottom end an cylinder head could you tell me if you send it to Greece ? how much is the postage ? please send me a pm
 
Kostis, send me your exact address and I'll get a quote for getting them sent to you.
 
Guys that Gojiken header is a must buy ;) a must buy for b16b - b18c engines !
 
I'm interested in the s80 box could you pm me your best price. Also what condition Are the oil bungs on the box in?
 
Back
Top