cams for a daily driver

[Tristan]

HI guys, just wonderin what cams all of you would suggest for a b18c6 daily driven civic ek4 (ye conversion). i do have this q on another thread but i dno if it was relevant to the main title so i opened up this thread. pretty much just looking for suggestions for types of cam and other than retainers, new valves, new cam gears and a remap is there anything else id need, looking for 210+ bhp.

thanks guys

 

[Topher-EK9]

search button is your friend.....

i ran around with Feels cams in my EG6 i drove it daily at least twice lol..
they were perfect... lots of top end pull but were fine at tickover and normal driving..

just the price htat is the big kick in the face....

 

[Vtec6000]

Skunk2 tuner series stage 2

 

[tama666]

^^^

 

[DOSvtec]

Skunk2 tuner series stage 2

there's a set on pistonheads mate you should cheak out, stage 2 tuner cams, valve's, springs and retainers at a good price

 

[rvm]

Skunk2 tuner series stage 2

x 2, stay away from pro series.

 

[DOSvtec]

x 2, stay away from pro series.

why!? alot of people seem to use them but i've also heard of them wearing away quicker and times breaking

 

[rvm]

why!? alot of people seem to use them but i've also heard of them wearing away quicker and times breaking

I was not able to get a decent idle with them on my ek9 with 11.3 compression.

 

[oscarsayco]

I was not able to get a decent idle with them on my ek9 with 11.3 compression.

Sounds to me that your tuner didn't know what he was doing because pro's stage 2 are not that aggressive for you not to get a good idle.

 

[Shandow]

Pro2s have said to have been easier to make idle than pro1s lol..

 

[adamek9]

im getting the buddy club spec IV'S are these any gud for my b16b ? ?

 

[Tristan]

wolud also like to ask will judt the camshafts, retainers and springs be enough or would i also need new valves and cam gears, thx

also would any1 suggest the skunk2 intake http://www.skunk2.co.uk/product.php...NGINE&level2=INTAKE+MANIFOLDS&level3=&id=4264 and throttle body http://www.skunk2.co.uk/product.php...1=ENGINE&level2=THROTTLE+BODY&level3=&id=4632 or would the standard teg type r be fine?

 

[Szabb1]

Skunk2 tuner series stage 2

will it work fine with stock internals? I mean this cams isn't too big for stock cr.?

EK4 cr. is not so high as the EK9.

 

[Vtec6000]

will it work fine with stock internals? I mean this cams isn't too big for stock cr.?

EK4 cr. is not so high as the EK9.

They will work but not as well cause your compression is a little on the low side(10.4:1 b16a or 10.2:1 b16a2) 11.0:1 would be a better CR for stage 2 tuner series.

 

[integraleo]

not sure about tuner series but i found info on pro series and they reccomend compression of 12:5 for stage 2's for best gains

 

[rosey_ej9]

I was looking to do a build with Buddy Club Spec IV cams, trouble is trying to plan out a setup that gives you a higher c.r as possible without having P2V clearance issues.