Engine check light after a basic service

[ry4N]

I serviced my EK9 today and after a short drive (no Vtec) the engine check light has come on, strange thing is I left it to cool down for 10 mins or so and drove back home; the light didn't come back on...

Now the service consisted of :

New plugs
Oil + Filter change
Dizzy Cap
Air filter

The car drives perfectly and certainly feel healthy after the service! No signs of smoke or it lacking in power!
What things could I check over (sensors etc) if this comes back on whilst driving??

Cheers
Ryan

 

[kellsled]

co2 sensor?mine did this and thats what it turned out to be

 

[leeK9]

check the fault code

 

[ry4N]

co2 sensor is located near the CAT isn't it?

Not too sure about how to check the fault codes Lee as I'm still learning the basics atm, I take it this requires diagnostic software linked to the obd port?

 

[type-r-dunk]

Really easy all you will need is a paper clip. Look up under the dash near to the ecu and you will see a green rubber holder with 2 plugs in it (3 wire and 2 wire plugs). Short out the 2 wire plug, turn ignition on count engine light flashes. Long flash = 10, short flash = 1.
Here is a full description with pics on my site FastJapCars

Dunx

FastJapCars.Com :: Technical Information :: Honda Error Codes