Explain this ?


Topher-EK9

Killa B !!
Donator
Joined
Jan 4, 2009
Messages
5,094
Saw this one Facebook and thought it'd be fun to share here :D

Explain the picture ?

 
Yeaaaaa bwoiiii, my new K sport 20 piston brakes are teh shiznit! They are so powerful I can literally do a front flip! :D
 
hydraulics or he just gone over a bump an got caught in the picture with back end up??
 
Alittle ramp slightly out of the picture? Can't be braking, the rear wheels are still moving.
 
car is being worked on and they have photoshopped out everything and made it look like the wheels are moving??

Either that, as above, on the down from a jump :run:
 
car is being worked on and they have photoshopped out everything and made it look like the wheels are moving??

Either that, as above, on the down from a jump :run:

I thought this. Something just doesn't look right, aside from the fact the car is doing an endo :confused:
 
i have seen a drag car do this by putting it in reverse by accident, but there is no reverse lights and no smoke from engine bay..... There would defo be smoke :p
 
Its a legitimate photo guys no photoshopping here.

Yeaaaaa bwoiiii, my new K sport 20 piston brakes are teh shiznit! They are so powerful I can literally do a front flip! :D

Haha lmao :D




As far as i'm aware guys there is no ramp out of picture, And if that was the case the front suspension would be depressed ;)


Oh and i don't actually know what happened haha, but none of the above is correct ;)
 
Weird picture to me, driver side rear wheel is still compressed [up in the arches] but the other is not.
 
i think this is the closest explanation...

"Well lets See . His brake lights are on and the parking lights are not so he's not launching in reverse. And its not the coilovers cause it would stay way lower to the ground. And not a lock up cause all the wheels are still rolling. . May be he did go into 1st and scared him and it just tap the brakes . Or maybe he was auto crossing the **** out of it and the back right wheel lifted got him off gaurd and he straightened it and BAM both wheel off the ground. Hit breaks to stop."
 
Weird picture to me, driver side rear wheel is still compressed [up in the arches] but the other is not.

Thats why i think the above explains it.. a rear wheel lifted and he corrected it kicking the other up, Like you say the rear wheels are not at the same level ;) good eyes dude :nice:
 
Well the brake lights are on so I'm gonna assume some heavy ass engine swap and a stripped out rear end giving a huge front weight distribution, really sticky tyres and monumental braking, enough to lift both rear wheels off the ground.

A 70% front weight and about 1.4G under braking would just about do it.

You wouldn't get both wheels off the ground with a steering correction.
 
Is there a UFO involved?

Brake lights seem to be "on" but the 3rd brake light is off. [under rear wing]
 
Third one is surplus to requirements. He's removed the electrics to save weight, further exacerbating the front weight distribution. ;)
 
^ so shouldn't the rear wheels be stopped dead? unless it was hopping
 
Third one is surplus to requirements. He's removed the electrics to save weight, further exacerbating the front weight distribution. ;)

If that is the case, he can save more weight by removing the 3rd light. :p

Its very possible that the car is hopping about on a parking lot autox track.
 
Just noticed how high up the driver is, he too is being shot up in his seat, must be a bump he is recovering from.
 
well the page that posted it said no bump involved and not heavy braking .... just sayin.

Look at the front suspension, would it not be fully complressed it the brakes were on hard and the weight thrown forward... surely no coilover is that hard ?? or is it ?
 
Back
Top