help on brake master cylinder and prop valve non abs

[Mafew]

Hi guys ive recntly bought a shell and theres no lines yet. Now my question is that on the master cylinder should the feed at the front or side feed the front brakes or does it not matter? If someones has a non abs ek9 with prop valve in place pictures of lines would be very much appreciated

 

[Wazer]

Not sure if it doesnt matter, but here's a picture of mine. Also I'm running a variable prop valve to the rears.

The front feed from mc feeds the rears through the prop valve
Side feeds the front

Hope this helps

 

[R883]

I am in the process of doing my lines just now, in fact just away to the garage now to start

What i have found out so far is
One port has slightly more pressure output than the other so it should be -

Front port to rear brakes
Rear port to front brakes

But be careful if wanting to run a adjustable bias valve
See Kozy`s post here
I was going to run it this way but have now decided to change to a OEM prop valve

As for plumbing it in, i am using this photo

 

[tama666]

^^^sweet! Kozy knows his stuff!

 

[Mafew]

Awesome help guys! Think ive got all the info I need much appreciated! I do have a willwood adjustable valve but since I found a non abs prop valve im using that instead