help plz.

[rhys lew]

just got myself a fujitsubo header off a guy on here he sed it wud fit to a standerd b-pipe but it dont.. is ther anything i have to do to get it to fit. thers about a 6 inch gap between the b-pipe and the header. and ther aint a lambda sensor on it.

 

[cormy]

not being smart but you know the cat goes between the header and b-pipe and thats roughly 6 inches long, sounds like your missing that.

 

[rhys lew]

the cat is allready on my b-pipe dude. i avnt done anything with the b-pipe just the new header. do you now if the spoon b-pipes come the same length as the standerd b-pipe.

 

[cormy]

would you be able to get a picture of it? It sounds weird, most b-pipes are the same length unless you got one for the wrong car, I know there's a difference in length and width between jdm cars and uk cars exhausts, if I remember correctly, sir is 2.25", vti is 2" and ek9 is 2.5". Then there's a different length between them too, and I'm not sure which part has the extra length, but the cat's are different length, if thats the problem, I'd suggest an adjustable length decat.

 

[rhys lew]

iv worked out wats wrong... thers a section been cut out of the header where the lambda sensor is suppost to b and the coller has been welded back on so its about 4 inch to short. iv been tucked up. the guy didnt tell me this when i bought it. why this has been dont i dont now.

 

[kellsled]

would you be able to get a picture of it? It sounds weird, most b-pipes are the same length unless you got one for the wrong car, I know there's a difference in length and width between jdm cars and uk cars exhausts, if I remember correctly, sir is 2.25", vti is 2" and ek9 is 2.5". Then there's a different length between them too, and I'm not sure which part has the extra length, but the cat's are different length, if thats the problem, I'd suggest an adjustable length decat.

vti's are 2.25 aswell mate,get an adjustable decat thatll sort you out

 

[rhys lew]

the collecter on the header i got is 2inch.. so iv been tucked right up. what wud happen if i got a custom b-pipe or adjustable decat to make it fit wud it lose power becos its 2 inch.