J jakej400 New Member Joined Apr 25, 2009 Messages 37 Sep 21, 2009 #1 how much of a drop gives a good increase in handling without becoming a pain and scraping over every bump?
how much of a drop gives a good increase in handling without becoming a pain and scraping over every bump?
blinx9900 Super Moderator Joined Dec 5, 2006 Messages 10,880 Sep 21, 2009 #2 depends how fat you are lol, seriously though it depends on how bumpy your roads are and how steep drive way entrances are.
depends how fat you are lol, seriously though it depends on how bumpy your roads are and how steep drive way entrances are.
J jakej400 New Member Joined Apr 25, 2009 Messages 37 Sep 21, 2009 #3 im only a skinney wippet ha.there not to bad around here would a 40mm drop be fairley ok?
stevenEK9 trackattack Joined Mar 11, 2007 Messages 4,250 Sep 21, 2009 #4 40mm isn't alot, will be fine As a rule of thumb, try not to lower it enough so that the Lower control arms are past horizontal, otherwise the roll centre of the car goes way off and the car won't handle well in the slightest
40mm isn't alot, will be fine As a rule of thumb, try not to lower it enough so that the Lower control arms are past horizontal, otherwise the roll centre of the car goes way off and the car won't handle well in the slightest
Vtec6000 Super Moderator Donator Joined Jun 5, 2007 Messages 6,222 Sep 21, 2009 #5 I have heard before if you can stand a can of coke under the front bumper then you will clear most speed bumps etc.
I have heard before if you can stand a can of coke under the front bumper then you will clear most speed bumps etc.
stevenEK9 trackattack Joined Mar 11, 2007 Messages 4,250 Sep 21, 2009 #6 Speedbumps are meant to be a maximum 100mm in height Lowest point under my car is the H-brace at about 70mm from the ground I can get over speed bumps no worries, just take them slowly
Speedbumps are meant to be a maximum 100mm in height Lowest point under my car is the H-brace at about 70mm from the ground I can get over speed bumps no worries, just take them slowly
Jokeshopbeard VTEC Addict! Joined Feb 18, 2008 Messages 2,321 Sep 21, 2009 #7 Whats the distance from ground to arches on yours Steven?
stevenEK9 trackattack Joined Mar 11, 2007 Messages 4,250 Sep 21, 2009 #8 Think it's 570mm all round, that's running 195/50 tyres on oem wheels
Jokeshopbeard VTEC Addict! Joined Feb 18, 2008 Messages 2,321 Sep 21, 2009 #9 Cheers man, running the exact same height/tyres/wheels myself, just wanted to see how I'd manage with an H brace. Good news!!
Cheers man, running the exact same height/tyres/wheels myself, just wanted to see how I'd manage with an H brace. Good news!!