Im new to this site, wanted to share my 95 Civic Si with B16B


magik8252

New Member
Joined
Aug 17, 2012
Messages
28
Good day all.

So im in the process of building my car. 95 Civic Si with B16B swap.

I really like all the information pertaining to the B16B on this site. I decided to become a member. Here are some pics and current mods. Side note: I purchased this car from my brother (he was original owner). The car had no mods done to it at all when I took ownership (in the States our EG Civic only comes with a D16Z6). Slowly it has been coming together.

Here goes.

1995 Honda Civic Si (Canadian Version)
B16B full swap
Excedy Stage 1 Clutch
CM Flywheel
BWR Cam gears. (currently set to 0 on both)
Innovative Motor Mounts
PLM Toda Rep Header
3in Blox Intake with VL Stack
BW Aluminum Radiator (3core) with Hoses
Buddy Club N Spec + with upper mounts Coil Overs
Eibach 32mm front sway bar
PasswordJDM 3Pt front Strut bar
Blox front control arms with camber kit
Energy Syspension bushings on front lower control arms
PLM Test Pipe
Apexi WS2 catback Exhaust
BWR LCAs (version2)
BWR Rear camber kit
ASR Subframe brace
Beaks Lower Tie Bar
22mm Rear Sway bar
195lph Fuel Pump
NGK Plug wires and plugs
EP3 Seats
Seibon CF Hood
15in Rota circuit 10s
Direzza Sport Z1 Star Spec tires 205/50/15

Very near future plans are to built the head just about decided on Buddy Club Head package with version IV cams. Stay with 1.6l bottom end.

Hope you enjoy. Thanks for looking.
 

Attachments

Last edited:


magik8252

New Member
Joined
Aug 17, 2012
Messages
28
My bad have not looked at my older post, thanks. Yeah im in the burbs. Elgin area.
 



saundz

Member
Joined
Sep 23, 2010
Messages
296
Looks really nice bud, really want to get the same front strut for my coupe.
 



saundz

Member
Joined
Sep 23, 2010
Messages
296
Nice updates :)
A new knob would look good interior wise.
I ended up getting the same front strut as you, just need to fit it now lol.
 


magik8252

New Member
Joined
Aug 17, 2012
Messages
28
Nice updates :)
A new knob would look good interior wise.
I ended up getting the same front strut as you, just need to fit it now lol.
Thanks. I will look into that. Not sure witch one to get. I do like the stock one though.

What king of car do you have? I had no clearance issues with my bar at all. Fit right in.
 



saundz

Member
Joined
Sep 23, 2010
Messages
296
Thanks. I will look into that. Not sure witch one to get. I do like the stock one though.

What king of car do you have? I had no clearance issues with my bar at all. Fit right in.
What about an ek9 gear knob or a spoon duracon (this is what I have).

I've got an em1, managed to get the strut fitted after bending a bracket out the way lol.
 



W80 YAU

モンスターの攻撃
Joined
Aug 3, 2011
Messages
710
How do you find the BWR Racing products???
Do you rate their quality and performance good???

As im considering getting their radiator and hose kit.
 







eg2_portuga

Member
Joined
Apr 28, 2014
Messages
82
I've always heard that the buddyclub spec iv are a little to much for a b16 with stock compression, hope that you can prove that what I'm hearing was wrong and achieve good numbers....best of luck mate, I'll following your project since I've on the dilema about choose buddyclub or skunk for my b16a1, I'm a f****** oportunist I know lol
 


JaysiR

KepitjDm
Joined
Aug 9, 2015
Messages
65
Good day all.

So im in the process of building my car. 95 Civic Si with B16B swap.

I really like all the information pertaining to the B16B on this site. I decided to become a member. Here are some pics and current mods. Side note: I purchased this car from my brother (he was original owner). The car had no mods done to it at all when I took ownership (in the States our EG Civic only comes with a D16Z6). Slowly it has been coming together.

Here goes.

1995 Honda Civic Si (Canadian Version)
B16B full swap
Excedy Stage 1 Clutch
CM Flywheel
BWR Cam gears. (currently set to 0 on both)
Innovative Motor Mounts
PLM Toda Rep Header
3in Blox Intake with VL Stack
BW Aluminum Radiator (3core) with Hoses
Buddy Club N Spec + with upper mounts Coil Overs
Eibach 32mm front sway bar
PasswordJDM 3Pt front Strut bar
Blox front control arms with camber kit
Energy Syspension bushings on front lower control arms
PLM Test Pipe
Apexi WS2 catback Exhaust
BWR LCAs (version2)
BWR Rear camber kit
ASR Subframe brace
Beaks Lower Tie Bar
22mm Rear Sway bar
195lph Fuel Pump
NGK Plug wires and plugs
EP3 Seats
Seibon CF Hood
15in Rota circuit 10s
Direzza Sport Z1 Star Spec tires 205/50/15

Very near future plans are to built the head just about decided on Buddy Club Head package with version IV cams. Stay with 1.6l bottom end.

Hope you enjoy. Thanks for looking.
Looking good man !!
 



Top