R11CH
EK9 Fan!
- Joined
- Sep 13, 2010
- Messages
- 174
Thought i would post up a few pics to show what i have been doing with my civic over the past few months. Enjoy
Theres not one bush, bearing, arm, brakes, springs etc... that's not been replaced by OEM Honda, powder coated, upgraded or renewed this car is just as clean underneath as it is on top
bit of spec:
Wheels and tyres:
Enkei RPF1's 16x7 ET35 (Fitted)
Custom machined up wheel spacers (Fitted)
Forged 70mm long wheel studs (Fitted)
Goodyear Eagle F1 tyres 215/40/16. 27 psi in the fronts, 28 psi in the rears. (Fitted)
Rays engineering security wheel nuts (Fitted)
Tyresure, tyre pressure and temperature monitoring system (Fitted)
EXTERIOR MODIFICATIONS:
J's Racing front bumper intake duct Fitted)
JDM wind deflectors (Fitted)
spoon sports carbonfibre spoiler (Fitted)
Mugen front lip with a custom front splitter (Splitter still to be made)
APR GT3 mirrors
INTERIOR MODIFICATIONS:
Apexi Power FC EL Hand Commander
Alloy throttle pedal (Fitted)
Honda integra recaro seat for passenger (Fitted)
Cobra suzuka carbon Kevlar fixed bucket seat for driver (Fitted)
Buddy club drivers seat rail (Fitted)
Ricco Racing 4 point 3" harnesses
Harness bar
Nardi steering wheel (Fitted)
Spoon sports gear knob (Fitted)
Tyresure temp and pressure display unit (Fitted)
Fan override switch with warning light set on carbon back panel (Fitted)
BRAKES MODIFICATIONS:
Cusco Master cylinder stopper (Fitted)
Ferodo DS2500 front and rear brake pads (Fitted)
Hel rear braided lines (Fitted)
Integra type R brake master cylinder and servo (Fitted)
Motul RBF660 brake fluid (Fitted)
Rear Integra type R 260mm brake conversion (Fitted)
Wilwood 310mm disc's with billet bell houses (Fitted)
Wilwood dynalite 4pot front callipers (Fitted)
Wilwood front braided lines (fitted)
SUSPENSION MODIFICATIONS:
ASR rear subframe brace (Fitted)
Front and Rear anti roll bar polyurethane bushes (Fitted)
ITR 96 spec anti roll bars 24mm front, 22mm rear (Fitted)
Jdm Function 7 Rear billet aluminium lower control arms (Fitted)
Function 7 spherical drop links (Fitted)
J's Racing front upper strut brace (Fitted)
New oem lower ball joints (Fitted)
Meister R Coilovers. Springs: 10kg Front, 8kg Rear. Dampening: 28 Clicks front, 23 clicks Rear, Pre load: 10mm front, 8mm Rear. (Fitted)
New OEM front wishbones powder coated gloss black fitted with Super flex bushes (Fitted)
New oem stabiliser arm bushes (Fitted)
New OEM Rear trialling arm bushes, Powder coated gloss black trailing arms. (Fitted)
Powder coated Gloss black front knuckles/ hubs, new bearings, forged wheel studs. (Fitted)
New oem outer track rod ends (Fitted)
SPD chassis brace (Fitted)
Spc front camber and castor arms. (Fitted)
Cyberspeed rear camber arms (Fitted)
Cyberspeed rear toe arms (Fitted)
Full Geometry alignment and suspension adjusted to suit, all done at Sumo Power. fast road/track so to speak.
TRANSMISSION MODIFICATIONS:
Competition Clutch kit stage 2 including release bearing (Fitted)
Energy Suspension Gear linkage bushes (Fitted)
Factory Honda LSD fitted.
Integra Type R Gear linkage and shifter (Fitted)
ENGINE MODIFICATIONS:
Apexi Power FC ECU (To be fitted and mapped)
Buddy Club oil cap (Fitted)
Energy Suspension Engine mount bushes (Fitted)
Honda integra type R rocker cover (Fitted)
J's Racing cold air duct Fitted
J's Racing 4-2-1 manifold, (Fully lagged) (Fitted)
J's Racing Tsuchinoko Air Intake Kit Carbon
JPerformance alloy radiator (Fitted)
NGK Iridium spark plugs (Fitted)
Spal 12" cooling fan (Fitted)
Spoon Low temp thermostat (Fitted)
Spoon Sports N1 catback exhaust system (Fully Lagged) (Fitted)
Tegiwa decat pipe (Lagged) (Fitted)
Theres probably some bits i have missed but basically the plan is to hit the tracks this year for some dam right fun
Theres not one bush, bearing, arm, brakes, springs etc... that's not been replaced by OEM Honda, powder coated, upgraded or renewed this car is just as clean underneath as it is on top
bit of spec:
Wheels and tyres:
Enkei RPF1's 16x7 ET35 (Fitted)
Custom machined up wheel spacers (Fitted)
Forged 70mm long wheel studs (Fitted)
Goodyear Eagle F1 tyres 215/40/16. 27 psi in the fronts, 28 psi in the rears. (Fitted)
Rays engineering security wheel nuts (Fitted)
Tyresure, tyre pressure and temperature monitoring system (Fitted)
EXTERIOR MODIFICATIONS:
J's Racing front bumper intake duct Fitted)
JDM wind deflectors (Fitted)
spoon sports carbonfibre spoiler (Fitted)
Mugen front lip with a custom front splitter (Splitter still to be made)
APR GT3 mirrors
INTERIOR MODIFICATIONS:
Apexi Power FC EL Hand Commander
Alloy throttle pedal (Fitted)
Honda integra recaro seat for passenger (Fitted)
Cobra suzuka carbon Kevlar fixed bucket seat for driver (Fitted)
Buddy club drivers seat rail (Fitted)
Ricco Racing 4 point 3" harnesses
Harness bar
Nardi steering wheel (Fitted)
Spoon sports gear knob (Fitted)
Tyresure temp and pressure display unit (Fitted)
Fan override switch with warning light set on carbon back panel (Fitted)
BRAKES MODIFICATIONS:
Cusco Master cylinder stopper (Fitted)
Ferodo DS2500 front and rear brake pads (Fitted)
Hel rear braided lines (Fitted)
Integra type R brake master cylinder and servo (Fitted)
Motul RBF660 brake fluid (Fitted)
Rear Integra type R 260mm brake conversion (Fitted)
Wilwood 310mm disc's with billet bell houses (Fitted)
Wilwood dynalite 4pot front callipers (Fitted)
Wilwood front braided lines (fitted)
SUSPENSION MODIFICATIONS:
ASR rear subframe brace (Fitted)
Front and Rear anti roll bar polyurethane bushes (Fitted)
ITR 96 spec anti roll bars 24mm front, 22mm rear (Fitted)
Jdm Function 7 Rear billet aluminium lower control arms (Fitted)
Function 7 spherical drop links (Fitted)
J's Racing front upper strut brace (Fitted)
New oem lower ball joints (Fitted)
Meister R Coilovers. Springs: 10kg Front, 8kg Rear. Dampening: 28 Clicks front, 23 clicks Rear, Pre load: 10mm front, 8mm Rear. (Fitted)
New OEM front wishbones powder coated gloss black fitted with Super flex bushes (Fitted)
New oem stabiliser arm bushes (Fitted)
New OEM Rear trialling arm bushes, Powder coated gloss black trailing arms. (Fitted)
Powder coated Gloss black front knuckles/ hubs, new bearings, forged wheel studs. (Fitted)
New oem outer track rod ends (Fitted)
SPD chassis brace (Fitted)
Spc front camber and castor arms. (Fitted)
Cyberspeed rear camber arms (Fitted)
Cyberspeed rear toe arms (Fitted)
Full Geometry alignment and suspension adjusted to suit, all done at Sumo Power. fast road/track so to speak.
TRANSMISSION MODIFICATIONS:
Competition Clutch kit stage 2 including release bearing (Fitted)
Energy Suspension Gear linkage bushes (Fitted)
Factory Honda LSD fitted.
Integra Type R Gear linkage and shifter (Fitted)
ENGINE MODIFICATIONS:
Apexi Power FC ECU (To be fitted and mapped)
Buddy Club oil cap (Fitted)
Energy Suspension Engine mount bushes (Fitted)
Honda integra type R rocker cover (Fitted)
J's Racing cold air duct Fitted
J's Racing 4-2-1 manifold, (Fully lagged) (Fitted)
J's Racing Tsuchinoko Air Intake Kit Carbon
JPerformance alloy radiator (Fitted)
NGK Iridium spark plugs (Fitted)
Spal 12" cooling fan (Fitted)
Spoon Low temp thermostat (Fitted)
Spoon Sports N1 catback exhaust system (Fully Lagged) (Fitted)
Tegiwa decat pipe (Lagged) (Fitted)
Theres probably some bits i have missed but basically the plan is to hit the tracks this year for some dam right fun
Last edited: