- Joined
- Mar 10, 2008
- Messages
- 3,206
- Car(s)
- 1997 Ek9,1996 ek4 siR, 1972 b18c4 mini
Here's my first ek9 which I sold a few years ago
http://www.ek9.org/forum/showthread.php?t=10564
Regretted selling it pretty quickly and have since had a couple of other Hondas (dc5,ek4) and I've always kept a look out for a half decant ek9.
Eventually I found one that would do the job and here it is
It's a 97 model with wind up windows and no air bags , (poverty spec/lightweight)
It's in need of some TLC and a few bits of paint work but arches etc are all good
Any way here's some pics
Engine bay before
After
Seats
After
Cleaned out the door shuts, this is how the looked after a spray with detergent
Got a load of service bits from jap service parts
And went over to opie oils and picked up some fluids
Ripped the aircon out yesterday
Decided to work out side in the sun although this meant walking back and forward to the garage for tools/supplies repeatedly
taped up the holes here for now untill I remove the internal parts
That's about it so far
Removed the a/c internals, quite an easy job
Spec of car so far
Buddyclub spec 3
Super low seat rail
Rota slips
J's intake
Bits to fit
Koyo full width radiator
Fender braces
Oil gauge temp/pressure
Harnesses
Coilovers
http://www.ek9.org/forum/showthread.php?t=10564
Regretted selling it pretty quickly and have since had a couple of other Hondas (dc5,ek4) and I've always kept a look out for a half decant ek9.
Eventually I found one that would do the job and here it is
It's a 97 model with wind up windows and no air bags , (poverty spec/lightweight)
It's in need of some TLC and a few bits of paint work but arches etc are all good
Any way here's some pics
Engine bay before
After
Seats
After
Cleaned out the door shuts, this is how the looked after a spray with detergent
Got a load of service bits from jap service parts
And went over to opie oils and picked up some fluids
Ripped the aircon out yesterday
Decided to work out side in the sun although this meant walking back and forward to the garage for tools/supplies repeatedly
taped up the holes here for now untill I remove the internal parts
That's about it so far
Removed the a/c internals, quite an easy job
Spec of car so far
Buddyclub spec 3
Super low seat rail
Rota slips
J's intake
Bits to fit
Koyo full width radiator
Fender braces
Oil gauge temp/pressure
Harnesses
Coilovers
Last edited: