Post Your Car & Mods!


hi foks i have a ek4 vti completely standard, and im after a exhaust, i want something tats quiet in adle and nice roar in vtec with being raspy hate raspy noises.i heard this was good can i have some one opion.ApexI World Sport II . thanks.
 
hi foks i have a ek4 vti completely standard, and im after a exhaust, i want something tats quiet in adle and nice roar in vtec with being raspy hate raspy noises.i heard this was good can i have some one opion.ApexI World Sport II . thanks.

Lol not to be rude, but think youve posted this in the wrong place mate, think your looking to start a new thread in the wanted section or the exhaust questions section, and then youll get some better answers in relation to your question :)
 
b68c254a.jpg


Vehicle
- 1999 Honda Civic Ej6

Colour
PY
Engine
B16B EK9
Hytech headers
CF Spark plug cover
J's Whale Pe*nis
ARP Headstud
RM M22X Cams
Supertech Valve Springs
Exterior Mods
Ek9 Front Lip
Ek9 Rear Lip
Ek9 Side Molding
Ek9 Side Mirror
Ek9 Front Grill
Ek9 Spoiler
Custom Tilt bracket
Ek9 side marker
Interior Mods
Ek9 Steering Wheel
Ek9 Cluster
Ek9 Recaros
Megan C Pillar
Takata Harness
Power window conversion
Carbon wrapped Center Console
s2k Shift Knob


Suspension
Ek9 5lug Extended studs
Ek9 Front Control Arm
Skunk2 LCA
ST rear sway bar
Ek9 front sway bar
Tein H-tech springs
DC2 strut bar
ASR rear brace

Wheels/Rims
Rota Slips 16x7 rear 16x8 Front
Ek9 stockers
Tyres/Tires
cant remember lol
I.C.E.
Double Din block off
JVC Deck
Sony Speakers

More Pics:
- Ek9 Replica Project FTW - Beyond.ca - Car Forums
 
Last edited:
Older pic, but on of the better ones

P280111_0835_02-1.jpg


Vehicle
- 1997 Honda Civic EK4

Colour
- White (To be redone championship white year end.)

Engine
- Currently B16a6
- 43mm ITBS
- CC Ultralight Flywheel
- Mugen rep 4-1 branch
- 57mm Mild Steel 2 Box Exhaust with F1X back box
- MSD Superconductor plug Leads
- Spoon reservoir socks;)

Exterior Mods
- CTR Wing
- Carbon Fibre OEM Mirrors
- Carbon Fibre B- Pillars
- Angel eye headlights
- Ek9 Taillights (conversion)

Interior Mods
- Custom 2 Tone Carbon Fibre Steering wheel with red stitching
- Momo Pedals
- CTR Gear boot
- Shortshifter
- Custom made Floor Matts
- CTR door Cards(Conversion)
- Black Suede interior Panels
- Refurbished seats with Red stitching and embroidery
- Dual Guage Pod with Oil pres and Temp gauges

Suspension
- Skunk 2 Adjustable Coil Over Sleeves
- Front Upper Strut Brace
- Rear Lower Tie bar

Wheels/Rims
- Advan Racing RGII 15" Rims
- D1 Spec Lightweight red lug Nuts

Tyres/Tires
- Firenza 195/55/15

I.C.E.
- Pioneer DEH4350 UB
- Pioneer 180W 2-way front 6" Mids
- Pioneer 460W 5-way rear 6x9's
- Pioneer 1200W DVC Subwoofers x2
(havent bought amplifiers yet.)

More Pics:
- I havent really that many pictures of the actual car , want to get it redont before i get a photo shoot done. But heres the the link to my build thread(in my sig as well) where most of the pics go.

Skar's '97 Civic Vtec - 56k Fail..



YouTube Videos:
- B16a6 Vtec 0-100.avi - YouTube

Comments:
- Love the car to bits. Engine is being changed soon to something a bit more JDM :win:, not going my original route anymore. Still got a way to go but looking forward to it.
 
Vehicle
- 1996 Honda Civic EJ9

Colour
- White (Nh-0, Championship white)

Engine
- Stock D14A4

Exterior Mods
- Front CTR LIP
- Rear CTR LIP
- '' CIVIC TYPE R '' Sticker rear
- Exhaust SPOON N1
- Front headligths EK9
- Front bumper CTR
- Rear bumper 98-00
- Front Grill Ek9
- Honda Red Emblem oem Ek9 Rear /front

Interior Mods
- Shift Boot CTR
- Shift knob CTR
- Short Shift
- Red interior
- CTR Matts
- Arm rest + Cup holder
- Recaro seat's front / rear
- Recaro door insert
- Mugen Pedals

Suspension
- BC Racing Coilovers
- Subframe
- Lca Lower arms
- camber Kit (rear)

Wheels/Rims
Steel wheels :drive: 15'' x 6.5

Tyres/Tires
- Toyo T1R 195-50 15

Pics:

imagesqs.jpg



Youtube
http://www.youtube.com/watch?v=Xwv7XYpEbUs

More Pics:

http://forum.clubehonda.com/viewtopic.php?f=10&t=40672
 
Last edited:
Vehicle
- 1998 Honda Civic EK9 Type R RX

Colour
- Pheonix yellow

Engine
- Spoon panel filter + tegiwa direct air intake ( resonator box removed )
- Fujitsibu power getter cat back exhaust system

Exterior Mods
- carbon bonnet
- red anodised rear tow eye

Interior Mods
- rear cusco strut brace
- nardi steering wheel

Suspension
- Believed to be j's racing coilovers

Wheels/Rims
- Stock

Tyres/Tires
- yokohama winter tyres planning to change to prada spec 2's

I.C.E.
- Alpine cd player

Comments: Slow and steady project add new mods as and when i have the money next i would like to concentrate on suspension and chasis mods such as camber adjusters / lca's etc to set it up for some track days :)

regprotect-6.jpg
 
Vehicle
- 1999 EM1 Racecar

Colour
- Electron Pearl Blue EBP (B95P)

Engine
- 1999 CTR b16b
- Full all motor build with ITB's and custom parts throughout
- 242hp and 188lb/ft
- S80 WITH 4.7FD, ctr 4th + 5th and Kaaz LSD

Exterior Mods
- Fibreglaas doors
- Custom extended fibreglass wings
- Kevlar bonnet with scooby scoop
- lightweight roof
- Lexan windows
- Dry Carbon side mirrors
- Mugen wing with additional tilt brackets
- Front diffuser
- Front Grill Ek9
- single wiper
- blacked out headlights
- lap timer
- Rear 50/50's
- Rear rain light
- Full race livery for 2012 season

Interior Mods
- Completely stripped of everything
- Shift knob CTR + extended shifter
- Sparco seat + Schroth HANS harness
- xtended steering column with race steering wheel
- CTR clocks with sequential shift light
- Hydraulic handbrake, brake bias valve and plumbed braided lines througout
- Oil temp and pressure gauges
- Sparco FIA weld in cage
- plumbed in fireX
- Roll cage mounted rear view mirror
- Custom instrument panel

Suspension
- HSD one offs for racing only
- Every single arm rose jointed front to back
- Adjustable camber, tow and castor arms front and back
- Larger ARB's with rose jointed drop links
- ASR rear subframe brace
- Fully polybushed
- Custom reinforced Front subframe with short rack
- 30mm wheel spacers

Wheels/Rims
- UKDM teg-R 5x114 15'' x 7.5"
- Kosei K1 15" x 7.5"
- CTR 15" x 7.5"

Tyres/Tires
- Yokohama Advan A048 Medium compound

Pics:

em1rACECAR.jpg


EM1Racecar2.jpg


DSC0088.jpg
 
Just my LEV

Engine:
1.5L non vtec

Trans:
CVT

Suspension:
RS-R lowering springs
CTR shocks
CTR front bar
ITR rear bar
Front upper strut bar
Rear lower strut bar
Rear seat belt strut bar

Rims:
SSR Type X 9.5lbs
Toyo Proxies T1R 195-50-15

Stoping:
Si front rotor and caliper 10.2"

Everything else stock

civic LEV.jpg
 
Last edited:
OEM Suspension

OEM Brakes
Project Mu Pads
National UK drilled Discs
BF Goodridge Brake Lines
Juran studs
Project Kics Nuts

5Zigen 4-2-1 Header
Greddy N1 Exhaust
Buddy Club Decat
Fujita F5 CAI
NGK Kevlar spark plugs
GREDDY Iridium PRO Sparks
Greddy Timing Belt - Changed all seals new headcover (tensioner water pump etc.)
J's torque Damper
New idle Valve
New clutch master cylinder + pump
Mugen Thermostat
Spoon Fanswitch

Exedy Stage 2 Organic Clutch
ACT Prolite 4kg flywheel
Gearspeed full gearbox rebuild
Mfactory custom gearset -1st semihelical , 3-4-5 straight cut.
DriveShaft Shop Stage2 Axles

Bride Low Position seat rails
PIAA all lamps on the car
OEM EK9 Wheels - Pirelli P1's
 
Last edited:
Vehicle
- 1998 Honda Civic EK9 Type R

Color
- Championship White

Engine
- B18c Type R
- Iceman Intake, HKS Filter
- Mugen Headgasket
- Spoon p73 Balanced Pistons
- Spoon sparkplug wires
- Spoon Throttle Body
- Spoon Camshafts
- Spoon thermostat switch
- Mishimoto thermostat valve
- Koyo Radiator
- Billion Radiator hose
- Toda Camgear
- Toda Timing belt
- King motorsports exhaust manifold bolt
- Feels 421 exhaust manifold
- Vision test pipe
- Spoon Midpipe
- Spoon N1 exhaust


4.7 Transmission
- Spoon LSD
- Spoon Flywheel
- Russel steel braided clutch line
- Exedy racing clutch and pressure plate

- Spoon Twin block Calipers
- Spoon Front rotor
- Feels braided brake lines
- Winmax Brake pads

Exterior Mods
- Carbon fiber Hood and sidemirror

Interior Mods
- Honda access roof console
- Spoon gen.2 steering wheel
- Spoon instrument cluster gauge
- Spoon Titanium shift knob

Suspension
- Tein Flex w/ efdc
- Aluminum LCA's
- Spoon front and rear strut bar
- Spoon rear lower tie bar

Wheels/Rims
- Volk 16x7 +42 offset Ce28n
- Volk 16x7 Te37 +42 offset
- Volk 15x6.5 te37 +35 offset (f) +39 (r)

Tyres/Tires
- Potenza re11 16's
- Eagles RS sports 15's


149186_465539833525_535778525_5714630_6869760_n.jpg
 
My 1st Shake Down, Broke a drive shaft in the 3rd session.

also remounted the intercooler higher just recently.

IMG_5848.jpg

IMG_6103.jpg

DSC_3403_1024.jpg
 
420e0d35.jpg


Vehicle
2000 Civic 1.4i SE EJ9

Colour
Clover Green

Engine
B18C4 Bottom End, B18C6 Cylinder Head
J.E 81.5mm Forged Pistons (9.0:1 Compression)
Eagle H-Beam Rods
Civic Type R EK9 Cams
Brian Crower Titanium Retainers
Brian Crower Valve Springs
Greddy Oil Catch Tank
Edelbrock Intake Manifold
Edelbrock 75mm Throttlebody
Skunk 2 Adjustable Cam Pulleys
3.0" Downpipe
DRAG Intercooler Piping Kit
Samco Boost Hoses
Full Race Ramhorn Manifold
Magmawrap on Manifold
750cc RC injectors
AEM Fuel Rail
AEM Fuel Pressure Regulator
Walbro Fuel Pump
Precision Intercooler
Precision SC61 Turbo
TIAL 38mm External Wastegate
Custom External Screamer Pipe
Custom 3" Exhaust
Apexi Power Fc & Commander
HKS Twinpower
Samco Air Filter Relocation Kit
Hasport Mounts
S9B Gearbox
Kaaz 2.0 Way Adjustable LSD
Helix 6-Puk Paddle Clutch
Fidanza 7.5lb Flywheel
EK9 throttle cable
KOYO radiator with Buddyclub rad cap
Slimline Radiator Fan
Innovitive Wideband
GReddy Profec2 B Boost controller
AEM Oil Pressure Guage
AEM Oil Temperature Guage
Magnegore HT leads
Aeromotive Oil Feeds and Return Lines
HEL 9-Row Oil Cooler
HEL Braided Clutch Fluid Line
Kawasaki Green Coolant Hoses
Clover Green Rocker Cover
Gunmetal Grey Sparkplug Cover
Green and Black Reservoir Socks

Exterior Mods
Seibon Carbon Fibre Bonnet
Spoon Style Front Lip
Plastic Grills Removed From Bumper
EK9 Type-R Rear Lip
EK9 Type-R Grill
EK9 Type-R 2 Piece Spoiler with High Level Brake Light
Colour Coded
Custom EK9 Style Headlights, Painted Clover Green Inside
Smoked Side Repeaters
Semi-Smoothed Tailgate
Import Sized Plates
Honda Jazz Washer Jets

Interior Mods
Safety21 7-Point Rollcage With Removable Doorbars Added, Powdercoated Gold
Buddyclub P1 Limited Edition Fixed Bucket Seat
Buddyclub Superlow Seat Rails
EK9 Type-R Red Floor Carpet
EK9 Type-R Leather Gear Gaitor with Red Stitching
EP3 Type-R Black Steering Wheel with Red Stitching
EK9 Type-R Speedo Dials
Sabelt Black 3“ 4-Point Harnesses
Retrimmed Doorcards in Red
Skunk2 Billet Gearknob

Suspension
HSD Fully Adjustabl Coilovers
BLOX Anodised Gold Rear Lower Control Arms
MFactory Swaybar Kit, Powder Coated Yellow
Miracle X-Brace by Next
Password JDM 3-Point Front Upper Strut Brace in Black
EK9 Steering Rack
Spoon 4-Pot Front Calipers
EBC Grooved & Dimpled 282mm Front Discs from MG ZS 2.5 V6
Dixcel Front Brake Pads
Rear Disc Conversion
EBC Grooved & Dimpled 262mm Rear Discs from MG ZS 2.5 V6
Spoon Rear Brake Pads
DC2 Integra Type-R Rear Calipers Painted Gold
DC2 Integra Type-R 1” Brake Master Cylinder
DC2 Integra Type-R Brake Bias Valve

Wheels/Rims
Volk SE37k's - 16x7 et42 front, 16x8 et 28 rear

Tyres/Tires
Toyo T1R's (195/45/16)

I.C.E.
External Wastegate & External Screamer Pipe

More Pics:
d78ffb67.jpg


edeb80b9.jpg


f35eb8f2.jpg


01b81a5c.jpg


669cd7b4.jpg


c15fe5fd.jpg


a6e27bcb.jpg


c6067652.jpg


66af5f9c.jpg


f9a70dc5.jpg


420e0d35.jpg


96d48f0c.jpg


8a8ba641.jpg


6522b10d.jpg


0505a725.jpg


c5409620.jpg


f79c47fc.jpg


326a689d.jpg


YouTube Videos:
old one running low power
[youtube]SAW's Civic Road Test 430bhp - YouTube[/youtube]


Comments:

Getting alot of work done just now. New front tyres and tracking sorted out properly. Fully Superpro polybushed, ASR rear subframe and 24mm ARB kit, Skunk2 LCA's, Buddyclub Short Shifter, Hardrace front Tie Rods, Endless Traction bar, new front splitter and the map all checked and if need be fine tuned better now my tuner has a better dyno.
 
Back
Top