Rear Wheel Bearing HELP


Lewdawg

Lewdawg

New Member
Joined
Aug 5, 2011
Messages
33
Are they really 85 quid! Just been down to the local parts place and that's the price they came up with guessing they come with the hub?
Any one know I better place to get a set?

Also how hard are they to fit? :)

Cheers
Lewis
 
That is actually a really good price. Got one of mine done a year or so ago and the part on it's own cost me roughly £130-140

EDIT: Yes they come as part of the hub...cannot buy them seperately as I was told by Honda in Cardiff.
 
That's £85 each! Erm going to have the spend the money the noise is driving me crazy! Haa any idea on how hard it is the fit them?
 
Yep...mine was £130-140 just for the one!

All you have to do is...

  • Remove wheel
  • Remove drum/caliper+disc
  • Remove dust cover (the cap thing in the centre of the hub)
  • Remove the hub nut securing pin
  • Remove hub nut
  • Hub **should** pull out

Be careful though as there should be a washer which will be needed if you don't get a new one supplied. To fit the new hub:

  • Fit the hub along with the washer
  • Tighten the nut to 181Nm/134 lbf ft (DO NOT REUSE THE OLD ONE)
  • Fit securing pin
  • Refit dust cover
  • Refit brakes
  • Refit wheels

Hope that helps :nice:
 
Ha ha always happy to help out where I can :nice: if ya get stuck just gimme a shout. Am off work till Tuesday :nice:
 
Not bad for some! I've been a german car man so this japan stuff is a tad different :p need it sorted before I collect my freshy machined wheels ;)
 
Definitely for the newly machines wheels :nice:
 
You must log in or register to reply here.
Back
Top