wat cams should i get for my b16A


G

Gold Ek

Gold Rush EK
Joined
Nov 17, 2008
Messages
12
im thinking of getting some cams for my b16a motor but
its just so hard to decide cuz i want the best cams not too expensive but give good power ,im looking to go all motor too and see how much power i can make so anyone out there know please please let me know:)
 
You really have to decide this for yourself, how about you at least list what mods you have and how much power you want then we can give our opinion.
 
b16b cams are pretty cheap, would be a upgrade from your b16a ones?
 
I dont think "want to go all motor" and "not too expensive" go in the same sentence when building a well spec'd engine.

You need to decide what you want from the motor as cams are just one piece of the jigsaw and will work with some setups, and wont work very well with others.........Research is your friend :nice:
 
Kris! said:
I dont think "want to go all motor" and "not too expensive" go in the same sentence when building a well spec'd engine.

You need to decide what you want from the motor as cams are just one piece of the jigsaw and will work with some setups, and wont work very well with others.........Research is your friend :nice:
Click to expand...

well said!!
 
k well i did my research and ive seen,skunk 2 cams,type r cams,Toda cams,blox cams,
buddy club cams now out of all these cams which ones are the most reliable and easier to tune the money doesnt matter there all almost around the same price
 
Gold Ek said:
k well i did my research and ive seen,skunk 2 cams,type r cams,Toda cams,blox cams,
buddy club cams now out of all these cams which ones are the most reliable and easier to tune the money doesnt matter there all almost around the same price
Click to expand...


Where do you get TODA cams for the same price as the skunk, buddy or blox?
 
Plus most of them cams have different variations such as stage 1/2/pro etc etc

What other mods do you have?
What are your goals? 1/4 mile/track/all motor/pub bragging rights???
What management are you running?

Until you answer some of the above questions you wont get a proper response i'm afraid ;-)
 
yea i know that no **** toda cams arent the same price as skunk 2 cams or blox but maybe if u lived in southern california and u know people u mite get hooked up .
 
well
type r manifold
aem fuel rail and regulator
cold air intake
dc headers
straight pipe
p28 ecu tuned on chrone
those are my mods !!!!!!!!
 
- WHAT ARE YOUR POWER GOALS?
- WHAT IS YOUR BUDGET?
- WHAT KIND OF RACING, IF ANY DO YOU PARTAKE IN?
- DO YOU KNOW HOW TO READ?


:angry:
 
RagingAngel, i have been wanting to say this for a looong time, I LOVE YOU (no homo) i really wish we had a hugs emotocon right about now :hugs: <--- yes homo.
 
haha... but on a bit of a serious note, let this serve as an example to others as to HOW to ask AND answer questions.

I'd like to think we're a helpful bunch with a good bit of collective experience we can share....in short - help us, help you.
 
Write the names of all the cams down on a piece of paper in a grid(inside squares) and flip a quarter on to it, the first square to get 3 is the one you go with........


OR you can leave your motor ALONE and it will be reliable and inexpensive ....
 
Last edited:
NasTHatch said:
Write the names of all the cams down on a piece of paper in a grid(inside squares) and flip a quarter on to it, the first square to get 3 is the one you go with........
....
Click to expand...

I am deeply humbled by this magnificent scientific method... :bow::clap:
 
You must log in or register to reply here.
Back
Top