- Joined
- Aug 11, 2012
- Messages
- 663
As she stands now.
(Alot of image links were broken with the recent forum migration, I will be working to fix these links as soon as possible)
Updated List
Specs so far -
Turbo Set
Custom Sheepey Bottom Mount Vband PTE IN/OUT manifold
Precision 5558 JB turbo w/ Ported S" compressor cover 4.0" inlet/2.5" outlet
3inch vband downpipe
Open dump tube/screamer
Turbosmart 45mm Race Port Bov
Turbosmart 50mm Hypergate Wastegate
Sheepey 550hp garret core intercooler
3" Cold Side Piping to 2 1/4 Hot Side
Engine
Fully Cleaned / Serviced B16 Cylinder Head
Skunk2 Stem Seals
ARP Headstuds
Manley H Beam Conrods
Wiseco Low Compression Pistons
Baffled Sump
Micropolished crank
Acl race bearings The
Are mains bolts
Breathing
Skunk2 Megapower R System
Skunk2 Pro Series Intake Manifold
Port Matched Skunk2 Alpha Series Throttle Body
Thermal intake gasket
2.5" Decat
Fueling/Electrical
Id1000cc Injectors
Speedfactory 4bar Map sensor
MSD Extenal Coil / Distributor
MSD HT Leeds
P28 ECU with Hondata Boost ready S300 V3
Walbro 255 Fuel Pump
Bosch Battery
Turbosmart Boost Gauge
Dress up
Skunk2 Socks
Skunk2 Spark Plug Cover
Skunk2 Low Profile Valve Cover Kit
Smoothed and Painted Valve Cover
Cooling Plate
Headlight wire tuck
Air con removed
Bracket clean up
Braking
Ek9 1" Master Cylinder
Ek9 Servo
Front 282 Rbc GroovedDiscs
Rear 262 Discs
MG ZS Callipers
Delphi Pads
Zeta Zr10 Tyres
HEL Braided Lines
Suspension
Skunk2 Pro Lowering Springs
Hardrace Front Camber Arms
Hardrace Rear Camber Arms
Skunk2 LCA's
X-Brace
Full Energy Suspension Poly Kit
Front
-1.5 | 0.1 (Out)
Rear
-1 | 0.1 (In)
Transmission
S4C Gearbox
Mfactory Carbon Synchros
Mfactory Chromoly Racing Flywheel
Mfactory 6-puck Clutch
Mfactory Drain Plugs
ARP Flywheel Bolts
Exterior
Genuine Ek9 Grill Painted
SiR Front Lip
Rear Wiper Delete
Heko Wind deflectors
HID 6000k
Enkei 4x100 16x6.5 ET45 Honda Performance Line Wheels
Smoothed Rear Bumper
Color matched bump strips
Undersealed
Restored Headlights
Interior
Red Leather Stitched Gaiter
Skunk2 Weighted Gear Knob
Stripped Rear inc plastics (Painted)
Rear sound insulation removed
Broadway 280mm Mirror
Composite fibreglass bucket seats
6x9 Kenwood speakers in black carpeted boxes
Kenwood Head Unit
Before and After when she was N/A after a clean up and some personal choice cosmetic additions.
Stage one commenced not long after buying her. After a full clean down and some thoughts I decided to pursue the usual bolt on route.
(Alot of image links were broken with the recent forum migration, I will be working to fix these links as soon as possible)
Updated List
Specs so far -
Turbo Set
Custom Sheepey Bottom Mount Vband PTE IN/OUT manifold
Precision 5558 JB turbo w/ Ported S" compressor cover 4.0" inlet/2.5" outlet
3inch vband downpipe
Open dump tube/screamer
Turbosmart 45mm Race Port Bov
Turbosmart 50mm Hypergate Wastegate
Sheepey 550hp garret core intercooler
3" Cold Side Piping to 2 1/4 Hot Side
Engine
Fully Cleaned / Serviced B16 Cylinder Head
Skunk2 Stem Seals
ARP Headstuds
Manley H Beam Conrods
Wiseco Low Compression Pistons
Baffled Sump
Micropolished crank
Acl race bearings The
Are mains bolts
Breathing
Skunk2 Megapower R System
Skunk2 Pro Series Intake Manifold
Port Matched Skunk2 Alpha Series Throttle Body
Thermal intake gasket
2.5" Decat
Fueling/Electrical
Id1000cc Injectors
Speedfactory 4bar Map sensor
MSD Extenal Coil / Distributor
MSD HT Leeds
P28 ECU with Hondata Boost ready S300 V3
Walbro 255 Fuel Pump
Bosch Battery
Turbosmart Boost Gauge
Dress up
Skunk2 Socks
Skunk2 Spark Plug Cover
Skunk2 Low Profile Valve Cover Kit
Smoothed and Painted Valve Cover
Cooling Plate
Headlight wire tuck
Air con removed
Bracket clean up
Braking
Ek9 1" Master Cylinder
Ek9 Servo
Front 282 Rbc GroovedDiscs
Rear 262 Discs
MG ZS Callipers
Delphi Pads
Zeta Zr10 Tyres
HEL Braided Lines
Suspension
Skunk2 Pro Lowering Springs
Hardrace Front Camber Arms
Hardrace Rear Camber Arms
Skunk2 LCA's
X-Brace
Full Energy Suspension Poly Kit
Front
-1.5 | 0.1 (Out)
Rear
-1 | 0.1 (In)
Transmission
S4C Gearbox
Mfactory Carbon Synchros
Mfactory Chromoly Racing Flywheel
Mfactory 6-puck Clutch
Mfactory Drain Plugs
ARP Flywheel Bolts
Exterior
Genuine Ek9 Grill Painted
SiR Front Lip
Rear Wiper Delete
Heko Wind deflectors
HID 6000k
Enkei 4x100 16x6.5 ET45 Honda Performance Line Wheels
Smoothed Rear Bumper
Color matched bump strips
Undersealed
Restored Headlights
Interior
Red Leather Stitched Gaiter
Skunk2 Weighted Gear Knob
Stripped Rear inc plastics (Painted)
Rear sound insulation removed
Broadway 280mm Mirror
Composite fibreglass bucket seats
6x9 Kenwood speakers in black carpeted boxes
Kenwood Head Unit
Before and After when she was N/A after a clean up and some personal choice cosmetic additions.
Stage one commenced not long after buying her. After a full clean down and some thoughts I decided to pursue the usual bolt on route.
- Step one was to get her breathing better
- Full Skunk2 Setup was installed consisting of the following bits
- Skunk2 Alpha Series Manifold 2.5" collector,
- Skunk2 Megapower R System 2.75" straight through.
- 2.5" Tegiwa Decat.
Last edited: