stevenEK9
trackattack
- Joined
- Mar 11, 2007
- Messages
- 4,250
Item for sale:
Breaking high spec B18C EK9, details below...
Reputation:
http://www.ek9.org/forum/reputation-center/30316-stevenek9.html#post318087
Price:
see below
Paypal?:
Yes as a gift or cover the fees
Location:
Aberdeen
Condition:
see below
Description:
giving a mate a hand to break his car so i'm posting up the thread, I can verify all the parts are as described and genuine so I have no issues posting the thread on his behalf..........
anyways, onto the parts.........
shell has done roughly 110k km, most of the parts fitted within the last 20k km
- B18C4 block (but with Integra type R internals, crank / rods / pistons) with B16 head, skunk2 pro 1 cams and valvetrain, adjustable skunk2 cam gears, vented valve cover, recently replaced distributor, skunk 2 inlet manifold port matched to BDL 70mm throttle body
Engine built by R-Motion circa 50k miles ago
Engine made 210bhp with graphs to prove just recently from Wallace Performance in Aberdeen
ideally would rather sell this as a whole (inlet could be sold separately, WILL NOT split the block and head however)
£1,300
and vid of it running - http://vid268.photobucket.com/album...BF90701-3193-0000040C889EF678_zps9a1b7574.mp4
- ITR S80 gearbox with 4.4FD, no crunches at all, MTF regularly changed etc
£400
- Mugen replica airbox, filter freshly cleaned and oiled with K&N kit
£200
- EK9 standard exhaust manifold with almost new lambda sensor (no heat shields, decat already sold)
£80
- Advan 3 spokes, staggered 16x7 / 16x8, (can check ET but you get the idea from the pics). almost new falken decents
£800
couple pics on the car to give you a better idea of fitament, very very cool! hardly a mark on them
- Hondata S300 ECU
£300
- Seeker V2 GENUINE FULL CARBON rear wing, adjustable, loads of downforce, excellent
£650
- Engine loom
£50
- Alloy rad, half size / double width. comes with fan
£70
- DC2 rear seats (black with red stitch)
£80
- EK9 racebase doorcards, please note that they are cracked under the fabric, otherwise they are good. can sell with the full windy window mechanisms included if you want to convert to the lightweight arrangement........
£150
- EK9 non airbag steering wheel (same as a 96 spec steering wheel but with splines etc to fit the EK)
£100
- EK9 1" master cylinder & servo
£60
- EK9 brake conversion, 282mm front / 262mm rear brake conversion. comes with calipers and carriers with good pads
£150
no pics of the rears yet, just the fronts
- EK9 ARB's, full set of front and rear
£100
- EK9 clocks
£75
- Skunk2 weighted gearknob
£30
- front strut brace, ends painted cusco blue (brace is a mugen rep)
£40
- rear generic strut brace
£40
- C-pillar brace
£30
Cheers
Steven
Breaking high spec B18C EK9, details below...
Reputation:
http://www.ek9.org/forum/reputation-center/30316-stevenek9.html#post318087
Price:
see below
Paypal?:
Yes as a gift or cover the fees
Location:
Aberdeen
Condition:
see below
Description:
giving a mate a hand to break his car so i'm posting up the thread, I can verify all the parts are as described and genuine so I have no issues posting the thread on his behalf..........
anyways, onto the parts.........
shell has done roughly 110k km, most of the parts fitted within the last 20k km
- B18C4 block (but with Integra type R internals, crank / rods / pistons) with B16 head, skunk2 pro 1 cams and valvetrain, adjustable skunk2 cam gears, vented valve cover, recently replaced distributor, skunk 2 inlet manifold port matched to BDL 70mm throttle body
Engine built by R-Motion circa 50k miles ago
Engine made 210bhp with graphs to prove just recently from Wallace Performance in Aberdeen
ideally would rather sell this as a whole (inlet could be sold separately, WILL NOT split the block and head however)
£1,300
and vid of it running - http://vid268.photobucket.com/album...BF90701-3193-0000040C889EF678_zps9a1b7574.mp4
- ITR S80 gearbox with 4.4FD, no crunches at all, MTF regularly changed etc
£400
- Mugen replica airbox, filter freshly cleaned and oiled with K&N kit
£200
- EK9 standard exhaust manifold with almost new lambda sensor (no heat shields, decat already sold)
£80
- Advan 3 spokes, staggered 16x7 / 16x8, (can check ET but you get the idea from the pics). almost new falken decents
£800
couple pics on the car to give you a better idea of fitament, very very cool! hardly a mark on them
- Hondata S300 ECU
£300
- Seeker V2 GENUINE FULL CARBON rear wing, adjustable, loads of downforce, excellent
£650
- Engine loom
£50
- Alloy rad, half size / double width. comes with fan
£70
- DC2 rear seats (black with red stitch)
£80
- EK9 racebase doorcards, please note that they are cracked under the fabric, otherwise they are good. can sell with the full windy window mechanisms included if you want to convert to the lightweight arrangement........
£150
- EK9 non airbag steering wheel (same as a 96 spec steering wheel but with splines etc to fit the EK)
£100
- EK9 1" master cylinder & servo
£60
- EK9 brake conversion, 282mm front / 262mm rear brake conversion. comes with calipers and carriers with good pads
£150
no pics of the rears yet, just the fronts
- EK9 ARB's, full set of front and rear
£100
- EK9 clocks
£75
- Skunk2 weighted gearknob
£30
- front strut brace, ends painted cusco blue (brace is a mugen rep)
£40
- rear generic strut brace
£40
- C-pillar brace
£30
Cheers
Steven
Last edited:
