mugen_rr
mugenRR
- Joined
- Dec 4, 2008
- Messages
- 12
Hi,
First of all i wish all the members and everyone a happy new year!!! Recently i bought a bee r* rev limiter type h for my ek9rx i am running a p28 chiped ecu with a conversion harness, so i went to the electrion with it and gave him some notes wich i found on here, so he connected the 12volts and the earth but we couldnt locate where to attach the RPM signal, the ignition signal was connected to the igp1 power source on connector b of the ecu, the bulb is flashing but no spark is beeing cut, please can anyone tell me where the rpm signal has to be attached exactly, i cut the 4cycl grey wire thankyou very much!!! all the best!!
Red wire: 12V+
Black wire: Earth
Yellow wire: RPM Signal
Green wire: Ignition signal.
http://www.ek9.org/forum/other-technical/201-honda-usefull-ecu-pinouts-obd2b-obd2a-obd1.html
First of all i wish all the members and everyone a happy new year!!! Recently i bought a bee r* rev limiter type h for my ek9rx i am running a p28 chiped ecu with a conversion harness, so i went to the electrion with it and gave him some notes wich i found on here, so he connected the 12volts and the earth but we couldnt locate where to attach the RPM signal, the ignition signal was connected to the igp1 power source on connector b of the ecu, the bulb is flashing but no spark is beeing cut, please can anyone tell me where the rpm signal has to be attached exactly, i cut the 4cycl grey wire thankyou very much!!! all the best!!
Red wire: 12V+
Black wire: Earth
Yellow wire: RPM Signal
Green wire: Ignition signal.
http://www.ek9.org/forum/other-technical/201-honda-usefull-ecu-pinouts-obd2b-obd2a-obd1.html