ek9 head b18c bottom end


kev_ek9

kev_ek9

Active Member
Joined
Jan 27, 2009
Messages
1,297
Item for sale: B18C Bottom End
Reputation: kev_ek9
Price: £300 offers will be considered as need this gone
Paypal?: yes as long as 4% fees covered, can also deliver at extra cost
Location: n.wales
Condition: 7/10
Description: this is B18C Bottom End which was fully rebuilt around 15k miles ago. The crank was polished, ACL Race bearings and thrust washers fitted, and the pistons are oversize as well. All gaskets/seals and the pistons/rings were sourced through SimAuto.

seems like the bearings have gone as the bottom end is knocking i have bought a new engine so this is no longer needed offers for this item. i paid £790 for it

still in car but will be coming out soon

Pictures:

these are the ones i was sent before as i was buying the bottom end

5ec87980.jpg


5f976fef.jpg


c739591c.jpg


8e4ee4ee.jpg


66527bd2.jpg


697104d0.jpg


b00d27dc.jpg


f06f9df4.jpg


Bores as you can see are on top condition, as are the tops of the crowns. Only marks you can see on the bores are from when it was honed

Item for sale: B16B head
Reputation: kev_ek9
Price: £450 offers will be considered as need this gone
Paypal?: yes as long as 4% fees covered, can also deliver at extra cost
Location: n.wales
Condition: 9/10
Description: B16B head, the exhaust valve was damaged so head was sent off and had new valve from honda also was pressure tested when this item was replaced to make sure it was all done correct, also when this set up was all dont the water pump and cam belt were also done
Pictures: will get some up when i get a chance, not much to see though as its not out of car atm but will be soon no inlet manifold cam cover will be replaced with a black one unless someone really wants to buy it but has burn marks on cam side where it was set next to something hot
 
Reason for failure? Can you split the bottom end to show people the condition of the crank - will really change the valuation ;)
 
joe said:
Reason for failure? Can you split the bottom end to show people the condition of the crank - will really change the valuation ;)
Click to expand...

as stated `seems like the bearings have gone as the bottom end is knocking`

engine is not out of car as of yet so cannot split also i dont have knowledge of how to do this anyone who does have knowledge can always make me an offer and split it as the parts in the block be worth more than what im asking hense low price because i am not mechanical enough to take an engine apart
 
kev_ek9 said:
as stated `seems like the bearings have gone as the bottom end is knocking`

engine is not out of car as of yet so cannot split also i dont have knowledge of how to do this anyone who does have knowledge can always make me an offer and split it as the parts in the block be worth more than what im asking hense low price because i am not mechanical enough to take an engine apart
Click to expand...

Depending on how badly the crank is damaged it might be worth less. It's only a few bolts to strip the bottom end. I managed to strip one with no previous experience, they're fairly easy
 
cormy said:
Depending on how badly the crank is damaged it might be worth less. It's only a few bolts to strip the bottom end. I managed to strip one with no previous experience, they're fairly easy
Click to expand...

il look into it then or see if i can get someone to do it however it will not be badly damaged cause as soon as it was knocking it was turned of and towed home, as stated the pistons are oversized block been bored so even if needs different crank the other parts are worth it alone, cheers for the input fella
 
Is this a Type R bottom end and crank??

Do you have pictures of the crank yet??
 
KieranEG6 said:
Is this a Type R bottom end and crank??

Do you have pictures of the crank yet??
Click to expand...

whatever is standard that i am aware of mate was not told of this bein uprated just the pistons and bearings

once iv sold a few bits i will be getting civic into my mates unit and engines swapped so will get pics up then, i will try my best to do this asap
 
joe said:
Split the bottom end or you'll never sell it mate.
Click to expand...

thanks for advise I don't have the knowledge or time to do so hense why doing as a whole I sold my b16b bottom end damaged with no problem just for me to pay for someone to take it apart an then sell may aswel scrap it after and that prob work cheaper. I'd prefer someone to make something of good parts than bin it
 
We can do a deal on this - can you PM me please so I can reply?

[I don't have enough posts to PM you.]

thanks
 
You must log in or register to reply here.
Back
Top