I just changed my pads and noticed the old ones didn't wear evenly.
I'm not sure if this is normal.
One was worn down loads, the other still had plenty of meat left on it.
Is the caliper at fault is this normal?
id say one of the caliper slider pins is siezed.jake it out and see if any of the rubbers are split and letting dirt in if so jus remove the muck and claen up pins then grease them and job done.
make sure the two pins that the calliper bolts onto the carrier are free moving, if they are then dont worry about it, just make sure your pads get changed when they need to