highlandej9
New Member
- Joined
- Mar 23, 2013
- Messages
- 141
When I bought car I did know it had a but of rust on arches but didn't think it was bad although couple days later I poked my finger right through it I wa gutted really thought I was gna need a new arch but found this stuff ISOPON T40 here's what I done
Cut rust away and gave it a good wire brush to make a key
Used the wire stuff plasterers use for chip board and placed it on back of hole
Pasted the fibre glass on the back and a bit on the front and used a old credit card to shape to car
After half a hour it is set solid as good as metal
Sanded and shaped it
Now ready for paint
Looks rough but will add pic once painted
Cut rust away and gave it a good wire brush to make a key
Used the wire stuff plasterers use for chip board and placed it on back of hole
Pasted the fibre glass on the back and a bit on the front and used a old credit card to shape to car
After half a hour it is set solid as good as metal
Sanded and shaped it
Now ready for paint
Looks rough but will add pic once painted
Attachments
Last edited: