Daveracing
New Member
- Joined
- Feb 17, 2010
- Messages
- 17
Hi all. I have a ek4 b18c4 engine. upgrading the front and rear discs and have run into prolblems with the rear caliper carriers. This is what i have found out.
Civic mb6 and rover 600 front caliper and carriers are exactly the same and bolt straight onto ek hub. (Need 2mm milling off the carrier to ensure the disc is central)
However i aquired rover 600 rear calipers and carriers. The calipers are exactly the same as the Mb6 and accord etc. but the carriers from the rover do not fit the hub as the bolt hole locations are closer together.
My question therfore is which caliper carriers will fit in order to mount the carrier?
I have been told rover 180 and 160 might fit and also the integra.
Thanks for your replies
Civic mb6 and rover 600 front caliper and carriers are exactly the same and bolt straight onto ek hub. (Need 2mm milling off the carrier to ensure the disc is central)
However i aquired rover 600 rear calipers and carriers. The calipers are exactly the same as the Mb6 and accord etc. but the carriers from the rover do not fit the hub as the bolt hole locations are closer together.
My question therfore is which caliper carriers will fit in order to mount the carrier?
I have been told rover 180 and 160 might fit and also the integra.
Thanks for your replies