got bored so.....
long story short.
689r poof'd out on reshelling a ek9 so i took it off him
got the car like this...
took the car straight to AUTOMEK,
Andrew Baird rebuilt my car from scratch. Took him about week to get everything sorted...
Always took my car to Andrew and had no problems what so ever..
He done his stuff
and a bit more...
Cars built, took it home and left it for 2-3 weeks due to Imy was moving units, Imy resprayed the full car and a extra bumpers.
just about finished respray
then i swap'd front ends, still got the airwalker in my garage..
then i got a 3" exhuast made and took it down to TDI north to get remapped
SPEC-
Engine: - K20a - Rcrew Exhaust Manifold - Vision Technica Test Pipe - 3"custom exhuast with js style backbox - Karcepts 3 Inch CAI With Velocity Ctack And K&N Filter - Karcepts TB Spacer - RBC Manifold - Hondata Intake Gasket - Golden Eagle Fuel Rail - Summit Fuel Lines - Aeromotive FPR - K Tuned Clutch Line - Hasport Axles - Hondata K Pro - Hasport EKK2 Mounts - Mishimoto DC5 Radiator With Slim Size Fan - J's Racing Rad Cap - HAMP Oil Filter - MOTUL 300v 5W30
Transmission: - KAAZ 2 Way Diff - Hybrid Racing Shifter
Interior: - Bride Zeta III Bucket Seat [Driver] - Bride Low Side Mount Rails [Driver] - Takata Harness 4 Pt Racing Seat Belt [Driver] - Memoryfab Carbon Seat [Passenger] - Buddyclub Low Seat Rail [Passenger] - Sparco 3pt Harness [Passenger] - Spoon Duracon Shift Knob - EK9 Shifter Gaitor - EK9 Door Cards - Momo Monte Carlo Steering Wheel - Mugen Power Horn Button - Momo Boss - Snap Off Boss - No carpets - no rear seats - no rear plastic
Exterior: -GT carbon wing with custom mounts - EK9 Front Headlights - EK9 Tail Lights - OEM ek9 grill - OEM Antenna Block Off Plate - Spoon Mirrors - C-west vented bonnet - Rx7 custom made rear diffuser - First molding front lip - airwalker front bumper - carbon canards - HID's 6000K
Chassis: - Cusco zero II Coilovers - EK9 Antiroll Bars - J's Racing Front Shock Tower Bar - Function 7 Lower Control Arms - full Hard Race bush kit - skunk2 pro front camber arm - rear camber arm - rear toe arm - next mircule x brace
Wheels & Brakes: - 5std hubs - ds2500 Brake Pads - 15" White Work wheels - toyo R888 195/50/15 - dixcel discs front and rear - Spoon brakes - hel braided brake lines
Got the car corner weight also, car feels so much better going round corners.
car weigh'd about 975-980kg including my self. Am a big boy lol
so quite chuffed with that.
Tdi north mapped the car,
at henrys dyno car made 257bhp and 170tq
tdi north 265bhp 180tq.
long story short.
689r poof'd out on reshelling a ek9 so i took it off him
got the car like this...
took the car straight to AUTOMEK,
Andrew Baird rebuilt my car from scratch. Took him about week to get everything sorted...
Always took my car to Andrew and had no problems what so ever..
He done his stuff
and a bit more...
Cars built, took it home and left it for 2-3 weeks due to Imy was moving units, Imy resprayed the full car and a extra bumpers.
just about finished respray
then i swap'd front ends, still got the airwalker in my garage..
then i got a 3" exhuast made and took it down to TDI north to get remapped
SPEC-
Engine: - K20a - Rcrew Exhaust Manifold - Vision Technica Test Pipe - 3"custom exhuast with js style backbox - Karcepts 3 Inch CAI With Velocity Ctack And K&N Filter - Karcepts TB Spacer - RBC Manifold - Hondata Intake Gasket - Golden Eagle Fuel Rail - Summit Fuel Lines - Aeromotive FPR - K Tuned Clutch Line - Hasport Axles - Hondata K Pro - Hasport EKK2 Mounts - Mishimoto DC5 Radiator With Slim Size Fan - J's Racing Rad Cap - HAMP Oil Filter - MOTUL 300v 5W30
Transmission: - KAAZ 2 Way Diff - Hybrid Racing Shifter
Interior: - Bride Zeta III Bucket Seat [Driver] - Bride Low Side Mount Rails [Driver] - Takata Harness 4 Pt Racing Seat Belt [Driver] - Memoryfab Carbon Seat [Passenger] - Buddyclub Low Seat Rail [Passenger] - Sparco 3pt Harness [Passenger] - Spoon Duracon Shift Knob - EK9 Shifter Gaitor - EK9 Door Cards - Momo Monte Carlo Steering Wheel - Mugen Power Horn Button - Momo Boss - Snap Off Boss - No carpets - no rear seats - no rear plastic
Exterior: -GT carbon wing with custom mounts - EK9 Front Headlights - EK9 Tail Lights - OEM ek9 grill - OEM Antenna Block Off Plate - Spoon Mirrors - C-west vented bonnet - Rx7 custom made rear diffuser - First molding front lip - airwalker front bumper - carbon canards - HID's 6000K
Chassis: - Cusco zero II Coilovers - EK9 Antiroll Bars - J's Racing Front Shock Tower Bar - Function 7 Lower Control Arms - full Hard Race bush kit - skunk2 pro front camber arm - rear camber arm - rear toe arm - next mircule x brace
Wheels & Brakes: - 5std hubs - ds2500 Brake Pads - 15" White Work wheels - toyo R888 195/50/15 - dixcel discs front and rear - Spoon brakes - hel braided brake lines
Got the car corner weight also, car feels so much better going round corners.
car weigh'd about 975-980kg including my self. Am a big boy lol
so quite chuffed with that.
Tdi north mapped the car,
at henrys dyno car made 257bhp and 170tq
tdi north 265bhp 180tq.
Last edited:
epic build
