Dunsy
Active Member
- Joined
- Feb 21, 2008
- Messages
- 2,593
As a few people are asking about this i thought i would put up a quick post about it
You will need (as a minimum)
300mm OEM ATR Discs
ATR Twin pot Calipers and carriers
OEM ATR/ITR Pads
Braided Brake lines (Recommended)
This is how to do it
The ATR Discs will fit straight on the EK9 Hubs
The Calipers require spacing from the disc with 2 washers (3mm i think), one top and one bottom.
Brake pads are Easy
Bleeding (Google it)
Bed your discs and pads in.
DONE
Sorry for the super quick write up but im leaving work 5 mins ago!
Will get photos and write a better explanation soon!
Edit to add:
To fit these brakes to a 98 spec Integra it is the exact same process as above except you do not require the spacers for the calipers as they fit perfect with no adjustment
Fitting a 15" wheel over these brakes
I Chose the Team Dynamic pro Race 1.2 on part recommendation from a friend who had these fitted to his EK4 with these brakes before...The EK4 has a thinner Hub though Which i didnt find out until half way through "modifying" my calipers
There was a bit of trial and error while doing this, trial fit the wheel then take some more caliper off evenly and just continue until the wheel goes on and rotates freely
I Went for a 40 Offset on the wheels and had to use a 5mm spacer aswell. There is ALOT of front clearance on the caliper but it is close to the sidewall of the wheel
Hope this Update has helped some people
Oh and just to say i got the wheels from Revolution247.com! Brilliant Guys and very helpful and friendly
You will need (as a minimum)
300mm OEM ATR Discs
ATR Twin pot Calipers and carriers
OEM ATR/ITR Pads
Braided Brake lines (Recommended)
This is how to do it
The ATR Discs will fit straight on the EK9 Hubs
The Calipers require spacing from the disc with 2 washers (3mm i think), one top and one bottom.
Brake pads are Easy
Bleeding (Google it)
Bed your discs and pads in.
DONE
Sorry for the super quick write up but im leaving work 5 mins ago!
Will get photos and write a better explanation soon!
Edit to add:
To fit these brakes to a 98 spec Integra it is the exact same process as above except you do not require the spacers for the calipers as they fit perfect with no adjustment
Fitting a 15" wheel over these brakes
I Chose the Team Dynamic pro Race 1.2 on part recommendation from a friend who had these fitted to his EK4 with these brakes before...The EK4 has a thinner Hub though Which i didnt find out until half way through "modifying" my calipers
There was a bit of trial and error while doing this, trial fit the wheel then take some more caliper off evenly and just continue until the wheel goes on and rotates freely
I Went for a 40 Offset on the wheels and had to use a 5mm spacer aswell. There is ALOT of front clearance on the caliper but it is close to the sidewall of the wheel
Hope this Update has helped some people
Oh and just to say i got the wheels from Revolution247.com! Brilliant Guys and very helpful and friendly
Last edited: