alan168 K20 build


1st ive seen this as well cracking read good work mate, and couldnt of picked a nicer colour :naughty: lol
 
thanks for all the kind comments guys

thought id update again
cage is finally bolted in, had some plates welded to the car, ill get soem pics of the plates when its back from the bodyshop as its getting interior sprayed and then arches and exterior when im ready

here is the cage: cusco safety 21 9 point

photo003.jpg


got bored of the ek9 rims and was looking for some semis for my track rims so i picked these off mitch, thanks again

IMG_2205.jpg


IMG_2204.jpg


well i didnt wana run the purple rims as dailys and dont want 3 sets of wheels so going to sell the ek9 rims and stuck the slips on with some new rubber.
heard good things about these so thought id try them out

so i needed some wheel nuts and ive had bad experiences with cheap ones before and got these new for a decent price after envy performance messing me about for 3 weeks saying they sent it everytime i called them. they never answer and always giving me excuses and to this day, still no reply / answer

anyway rays nuts :)

rayswheelnuts.jpg


so here is how the car stands now

forgive the wing, it happened when my balljoint popped on me lolz

IMG_2357.jpg


IMG_2356.jpg


and here is how it looks with the track rims
IMG_2344.jpg


IMG_2343.jpg


hard to capture the colour with my digital camera, imo it looks alot better in real life

so after my trackday i decided i wanted a full bucket and managed to pick up a bride vios 2 for a decent price although its got a rip that has been stitched back together, still perfectly usable but i'll be getting it retrimmed before i put it in once my rail comes from touge

brideviosII.jpg


IMG_2203.jpg


wasnt sure on the model at first tbh, was mixed between zeta and vios 2 so emailed bride tee's corp and they confirmed it was a vios 2 :)

currently trying to source a harness atm , i'll update if i get it



my front droplinks have been knocking like mad and really starting to piss me off so i ordered these from the us

IMG_2333.jpg



well my ride sits pretty low and my goddamn outer cv boots keep splitting so i ordered some of these at the same time which hopefully will let my arms sit better and stop splitting my damn boots! Hardrace roll centre adjusters

hardracerollcentreadjusters.jpg


My exhaust mani gasket has been blowing aswell and i've always wanted to get an uprated mani for my b20 and when this came along i had to take it, MFactory tri-y- thanks to danf

here is a couple of pics of it after i cleaned it

IMG_2332.jpg

IMG_2331.jpg


wanted to heat wrap it as i do and will be tracking my car and run a short ram j's intake so bought some decent heatwrap- 2"x50' which only got me this far with it LOL

IMG_2330.jpg


IMG_2352.jpg


IMG_2351.jpg


some more has come through today so hopefully ill be able to finish it off, its itchy as hell

gasketset.jpg


got new OEM gasket for it aswell thanks to oemjapparts, aswell as a rocker cover gasket to go with my VC setup

IMG_2206.jpg


IMG_2207.jpg


-10AN hose fittings and lines to which ill be fabbing up a custom catch tank. works out alot cheaper than buying kits from B&R and the likes

also had some aerocatches fitted, took me a while to get it sitting properly. I had a dodgy catch anyway and these give me a much better peace of mind and look pretty cool too! can just about make them out in the pic below

IMG_2354.jpg
 
Last edited:
that manifold made my mates b20 sound WILD

these updates are awesome, minted car
 
very nice build up, I love B20's! Looking forward to seeing your catch can set up! could you PM where you got the 10AN fittings and lines, etc please and what you are using to make your custom catch can? cheers :)
 
689R said:
that manifold made my mates b20 sound WILD

these updates are awesome, minted car
Click to expand...

thanks, cant wait to finish wrapping it and get it on!

ramboteamjon said:
very nice build up, I love B20's! Looking forward to seeing your catch can set up! could you PM where you got the 10AN fittings and lines, etc please and what you are using to make your custom catch can? cheers :)
Click to expand...


pm on the way!
I already have a catch can setup off the 2 rear block fittings. The one im going to do now is off the rocker cover venting to atmosphere


ijwhiteman said:
Loving it mate! Absolutely top work keep it coming!
Click to expand...

thanks ian

kellsled said:
awsome mate
Click to expand...

thanks!

stevenEK9 said:
Sunstrip and ditch the oem visors :)

Great updates!
Click to expand...

On its way, cage is coming up to get painted along with my interior so it'll come out along with roof lining!
will update when its done!



thanks for all the kind comments guys!
 
if you dont mind me asking what are the specs of the car now ?? how much power are you getting with this motor . thinking of swapping to b20 soon:nerv: found a good deal and wanna know how its holding up and what numbers have been achieved by some owners thanks
 
thanks for the comments!

engine wise i wont be going to mad with, plans are intake mani, TB, injectors, fuel rail to mount gauge on , FPR and maybe some EK9 cams with a tune after. So all bolt ons tbh.

After that just want to use money on the track :)

Not sure on power output, never dyno'd it.

B20z swaps should be around 200 mark, check the thread in the engine section
 
awesome build up mate keep up the good work :) wanna do mine like this
 
You must log in or register to reply here.
Back
Top