Brake Torque Values

[JoSh]

Basically does anyone have the torque values for the main bolts on the caliper/disc?

Went to tighten one of the two 14mm nuts that hold the outer casing to the caliper and it sheared off!

... luckily I managed to get the snapped piece out without drilling, and the threads inside the housing are still in-tact, all I need is a new bolt!

So if you could let me know the correct torque figures, I'd be very grateful!

Many thanks,

Josh..

 

[Daveracing]

Says in the haynes manual 33Nm. They don't need to be really tight. I usually do them to 30Nm. The important ones are the caliper carrier bracket bolts( ones which bolt to the hub).

 

[stevenEK9]

The ones from the caliper carrier to hub are 108Nm

 

[JoSh]

The ones from the caliper carrier to hub are 108Nm

Is that for the big 17mm bolts?

Also do you have any other torque figures for the rest of the bolts?

Cheers,

Josh..

 

[Daveracing]

which ones do you need specifically cause there are quite a few.
Also google honda workshop manuals. You should find them there.

 

[stevenEK9]

FRONT

Carrier to hub - 108Nm
Caliper to carrier - 34Nm
Bleed screw - 9Nm
Brake hose banjo bolt on back of caliper - 34Nm

REAR

Carrier to hub - 54Nm
Caliper to carrier - 23Nm
Bleed screw - 9Nm

 

[JoSh]

FRONT

Carrier to hub - 108Nm
Caliper to carrier - 34Nm
Bleed screw - 9Nm
Brake hose banjo bolt on back of caliper - 34Nm

REAR

Carrier to hub - 54Nm
Caliper to carrier - 23Nm
Bleed screw - 9Nm

... just what I was after, thanks!

Josh..