My EK4 Track Project


rw1990

Member
Joined
Mar 30, 2008
Messages
251
Right, been a long time lurker on the forum and I thought I might aswell post some pics up now. This is my 3rd civic, definitely my favourite. I know its not a 9 but oh well, that was bit out of my price range to be honest! My mate owned it for about 6months but decided he wanted to get a 9 instead, so he sold it to me for a very good price i couldnt turn down. Ive owned it for about 4 or 5months and plan on keeping it for a while, got loads of plans for it and will try and keep the thread updated. anyways, on with the pics.

Bought the car like this

IMG_0044-Copy.jpg


IMG_0038-Copy.jpg


first thing i done was take the stickers off, then replaced the polished slips with some 16" black rota grids, swapped with a mate. I know alot of people will think it looks a thousand times better on the slips but it was a bit too bling bling for me.

IMG_0234.jpg


IMG_0237.jpg


then colour coded the rear number plate recess

IMG_0538.jpg


followed by some spoon replica mirrors that i also colour coded, came out pretty good. also used some spacers to raise the bonnet a little bit.

IMG_0381.jpg


IMG_0445.jpg


IMG_0471.jpg


then decided it was about time to get on a diet, sound deadening was a right pain to take out. front didnt turn out too good so i will be re sanding and painting it again soon. Took the car to a weighbridge and it checked it at bang on 1000kg's, would like to get to 970 and its definitely acheivable

IMG_0330.jpg


IMG_0351.jpg


took these seats from my old civic, evo 4 recaros. plus a 3inch OMP harness.

IMG_0529.jpg


IMG_0531.jpg


then got myself a blox 490 limited edition gear knob, with a shift extension. the car also has a short shifter so the shift throws arent as long as you would think.

IMG_0492.jpg


next to fit, tegiwa brake stopper.

IMG_0545.jpg


random pic from pod, ran a 15.3@91, with **** nearly bald tyres and a slipping clutch (not to make excuses lol)

IMG_0044-Copyg.jpg


and a couple pics of how the car stands now

IMG_0541.jpg


IMG_0543.jpg


IMG_0422-Copy.jpg


my 2 previous cars, just for the sake of it

EG4
DSC02918.jpg


EJ6
DSC04073.jpg



there will be loads of changes over the next few months, will try and keep the thread updated.

thanks for reading, richard
 
Last edited:
very nice project, thanks for sharing :D
 
Nice project a 15.3 aint bad in a VTi

Bonnet tilt aint my cup of tea unless necessary and those washers are extra weight ha ha
 
Last edited:
Nice project a 15.3 aint bad in a VTi

Bonnet tilt aint my cup of tea unless necessary and those washers are extra weight ha ha
15.3 aint bad yeah, but it done a 15.2 before and that was just semi stripped. not really bothered though really

interior is badass
cheers, it still needs to be finished off with a steering wheel though, the oem one looks kinda silly in there now lol. new wheel coming soon


beautiful build.
thanks

So clean!!

I preferred the polished slips =D
lol someone had to say it! to be honest, i kind of want the slips back now, only coz there 15s. i'd paint em straight away haha.
the shell isnt that clean trust me! stonechips galore on the front end, and the passenger rear arch is damaged a bit where its been hit. bodywork isnt a priority for me though at the moment
 
Looks really nice dude, mugen front lip makes it look hard as f**k! Get the slips back on there :nice:
 
Reduce your weight...remove the sunroof and get a delete panel!
 
car looks awesome m8 nice work, and the interior looks good stripped to just two seats a dash and a steering wheel :) :)
 
Lovely project so far, seem to be going in the right direction from what i can see :)

What chassis mods do you have done?
 
Looks really nice dude, mugen front lip makes it look hard as f**k! Get the slips back on there :nice:
thanks. sometimes i like the lip as it does look quite aggressive and i dont mind it taking a beating, its currently split in two being held together by cable ties lol. it will be getting replaced with an oem ek9 lip with some winglets.

Reduce your weight...remove the sunroof and get a delete panel!
havnt forgot about that. sunroof and rooflining will be going eventually.

car looks awesome m8 nice work, and the interior looks good stripped to just two seats a dash and a steering wheel :) :)
cheers, just needs to be finished (for now) with a steering wheel

Lovely project so far, seem to be going in the right direction from what i can see :)

What chassis mods do you have done?
the car is currently on sleeves, will be getting meisterR coilovers christmas time, or possibly decent used coilovers of a similar price. tempted to go meisterR though just because if anything goes wrong its easy enough to get replacement parts.
have an itrdc2 rear arb to go on, but just waiting to get an ASR brace.
trailing arm bushes need to be replaced also, and the usual chassis bracing. was going to buy a tegiwa x brace the other day but dont really know, might just get a thick rear strut instead. how do you find the x brace?
also have a meisterR 286 setup being held for me by a mate, should be picking those up in a few weeks.

nice ek4, i've owned also a ek4. No budget for 9 yet :)
pretty much the same! no complaints about the ek4 though, it'll do me for now
 
very nice, like the mugen lip and like the mirrors but you should colour code your sides strip m8, would look better IMO
 
very nice, like the mugen lip and like the mirrors but you should colour code your sides strip m8, would look better IMO

was thinking about painting the sidestrips, its a maybe at the mo
 
Back
Top