rumble_rabbi
Member
- Joined
- Jun 8, 2011
- Messages
- 141
Mileage:115000km engine was rebuilt at 105000km
98 ctr pre facelift car has been minded like a child harder to find cleaner.
spec:95 itr head with ctr cams head ported and polished
98 spec itr bottom end engine was rebuilt december 09 with new valve stem seals rings and a genuine gasket set all round.
Mugen cai induction kit
98 spec itr manifold
Mugen twinloop catback with 5 ziegan decat silencer also removed from centrre section.
Mishimoto dc2 rad with tegiwa silicone hose kit.
Mfactory oil catch can,spoon engine torque dampner
98spec s80 itr box with a cusco 1.5 lsd 98 spec itr front hubs and shafts also used.
Exedy 3 puk paddle clutch with toda flywheel.
Bc racing coilovers
Ebc greenstuff drilled and grooved front discs with hawk hps pads
Carbon splitter with eye's brow's and spoiler
Rays Te37's 15''
Bi beam hid kit
Low spoon rails
Black recaro's
Apexi rsm
Apexi n/a timer
Apexi neo mapped at westward @213 at the flywheel
and 149.6 torque
Greddy oil temp/pressure and water temp guages with sandwhich plate
Plans for it : Carbon Bonnet, Takata Harness's , Map my Hondata S300
98 ctr pre facelift car has been minded like a child harder to find cleaner.
spec:95 itr head with ctr cams head ported and polished
98 spec itr bottom end engine was rebuilt december 09 with new valve stem seals rings and a genuine gasket set all round.
Mugen cai induction kit
98 spec itr manifold
Mugen twinloop catback with 5 ziegan decat silencer also removed from centrre section.
Mishimoto dc2 rad with tegiwa silicone hose kit.
Mfactory oil catch can,spoon engine torque dampner
98spec s80 itr box with a cusco 1.5 lsd 98 spec itr front hubs and shafts also used.
Exedy 3 puk paddle clutch with toda flywheel.
Bc racing coilovers
Ebc greenstuff drilled and grooved front discs with hawk hps pads
Carbon splitter with eye's brow's and spoiler
Rays Te37's 15''
Bi beam hid kit
Low spoon rails
Black recaro's
Apexi rsm
Apexi n/a timer
Apexi neo mapped at westward @213 at the flywheel
and 149.6 torque
Greddy oil temp/pressure and water temp guages with sandwhich plate
Plans for it : Carbon Bonnet, Takata Harness's , Map my Hondata S300
Last edited: