My B20B ek9 build up story


KieranEG6 said:
If you look in his center consol thats exactly one of those, little box full of crystals lol. Same one i have its a little dehumidifier, can get em on ebay for peanuts. They work ok but you need at least 2 or three around the car. :nice:
Click to expand...

I did put just one in but only about 2 weeks ago

dan k said:
Alright you not goin to get a nine or a jap car for your self mate
Click to expand...

I have imported about 150 Honda's now and about 100 of those have been ek9's. I get to drive them all the time and this B20 is sort of mine.
I used to have a G40 about 12 years ago and just fancied something different for a change.

stevenEK9 said:
More details on this!!!

My mate has had a couple G40's, great fun little cars
Click to expand...

Well i had been sort of looking foe one for about 18 months but they are all modded, rusty, white or red and high miles. As i wasn't desperate for one i just held out for the right one.
This one popped up on eBay, the seller didnt know anything about them so did a rubbish add. I took a chance and got it. It is one owner from new, gun metallic, full VW history, totally stock, 81k miles and was in storage for 5 years
:woot::drive::bow::wow:
I will get some pics of it up shortly.

Duncan
 
My mates old one was gun metallic, was a minter too, best colour for them!

Look forward to the pics/footage of the 9er on track this weekend :nice:
 
Sgarboman said:
Hi mate, can you please tell me where the cylinder head feed pipe starts? From the OEM pressure sender hole? I can not see the Golden eagle conversion kit...
Click to expand...

Hi
Sorry i missed this post.
The feed pipe just runns from the oil pressure sender hole to a pre drilled hole in the side of the head. It looks really simple to do if you could just buy the small pipe kit.
So sorry i do not know what make the conversion kit is.
Cheers Dunx
 
HYSVTI-S said:
i wish i worked with 9's the whole time like u man!
Click to expand...

I know i am quite lucky :) cheers

I fitted some new bits in preparation for Snetterton. What do you think?

IMG_2547.jpg


IMG_2549.jpg


IMG_2554.jpg


IMG_2559.jpg
 
I also fitted a quick relece steering wheel hub that also brings the wheel right up close to you, as it should do in a race car.

Finally put a new wheel on, i know its a bit "Max Power" but it is smaller than my old one, was free and feels nice to hold.

IMG_2550.jpg


IMG_2552.jpg


IMG_2551.jpg


IMG_2553.jpg
 
Liking the yellow cam cover a lot !

Only thing i dont like in the bay is the red hose going to the radiator expansion tank everything else looks awesome !
 
type-r-dunk said:
Hi
Sorry i missed this post.
The feed pipe just runns from the oil pressure sender hole to a pre drilled hole in the side of the head. It looks really simple to do if you could just buy the small pipe kit.
So sorry i do not know what make the conversion kit is.
Cheers Dunx
Click to expand...
Thank you :nice:
 
Barryl85 said:
Liking the yellow cam cover a lot !

Only thing i dont like in the bay is the red hose going to the radiator expansion tank everything else looks awesome !
Click to expand...

yellow ''fever'' spoon cam cover looks beter with blue hoses or blue spark cores!

$DSC_0016.jpg:nice:
 
Nice cam cover Dunc, is that a genuine spoon one or is it just painted?
 
nice spark plug wire :nice:

I also had the same in my own ...

and color on the cam cover that you chose a very nice ...
 
Last edited:
Just powder coated the cover. The red hoses were not my choice.
Dunx
 
Change the oil cap plus hoses other than that it looks a clean car. Perfured the old furry stering wheel :))
 
And this is her with her new cloths on. What do you think of the new logo design? i like it as its allot clearer.

IMG_2570.sized.jpg


IMG_2572.sized.jpg
 
looking good mate nice and clean decals look alot more jap loads better i think bud
 
You must log in or register to reply here.
Back
Top