Ramzys EJ9
- Thread starter Ramz007
- Start date
justingoldie
Track addict
- Joined
- Sep 17, 2010
- Messages
- 338
love the grey!
kaks_EK9Rx
Moderator
- Joined
- Dec 21, 2007
- Messages
- 4,005
Love the look of this car 
Not sure about the interior mirror though
Not sure about the interior mirror though
Haha Cheers buddy
I doo too
Aaaabsolutely stunning! This car shows me how far away from a world class is mine
Thanks for the very kind words bud, im sure yours isnt as bad as you make it haha. Keep at it!
Love the look of this car
Not sure about the interior mirror though
I love it! I get so many compliments about it haha. Even got told its the best mod ive done to the car lol. I think its awesome, its one of those things. Untill you have it, you wont know how good it is!
Cheers mate
Some updates -
This bastard cause me lots of grief Didnt want to buy new bushes so i thought id just get some new LCA instead.
Got my Skunk2 LCA through the post, the bushes are Massive!
Low car + Shitty Halfords jack = Ghetto ramp!!
Got one side changed
Shitty Halfords tool kit + Size 13 LCA bolt = Rounded nut. So had to go Hitmos and borrow his Impact tools which did the job.
Ghetto ramp part 2!
Thought id take some pics
Got both sides done, they were a bitch cause the bushes are so phat. I would only be able to get two aligned up and last one wouldnt get aligned correctly. After hours of hammer bashing while shuthan kept me company, it was finally done.
Yes i need to give this a clean >
Im gonna get brand new LCA bolts from honda when i order the benen tie bar so it looks all minty fresh. I ordered some LCA bolts from Bolts Bolts but they didnt wana go into the lca for some reason :S So i ended up using my old bolts..
So next day gave it a wash >
Snow Foam dat hoe
Some pics eddicus took which i re-edited a bit! Sorry dude if i messed em up haha
VOF getting mad Love! (we were tegiwa bashing at this moment)
Clean RPF1's thanks to Billberry and a wheel brush, so easy to clean inside out. Also can see the new enkei stickers.
My cushions were getting felt up alot this night
Wink Wink! Roarrrr
Whats this?!
Light as ****ing paper
Sexy weavess
Fitted!
Also ordered some Mfactory bushes as my FLP shifter isnt what it used to be. I felt hitmos FLP (inb4 kadir and his gay jokes) and it was so stiff! so once thats done im sure itll shift alot better.
Got my MOT in a weeks time, so got a few things on order!
This bastard cause me lots of grief
Didnt want to buy new bushes so i thought id just get some new LCA instead.
Got my Skunk2 LCA through the post, the bushes are Massive!
Low car + Shitty Halfords jack = Ghetto ramp!!
Got one side changed
Shitty Halfords tool kit + Size 13 LCA bolt = Rounded nut. So had to go Hitmos and borrow his Impact tools which did the job.
Ghetto ramp part 2!
Thought id take some pics
Got both sides done, they were a bitch cause the bushes are so phat. I would only be able to get two aligned up and last one wouldnt get aligned correctly. After hours of hammer bashing while shuthan kept me company, it was finally done.
Yes i need to give this a clean >
Im gonna get brand new LCA bolts from honda when i order the benen tie bar so it looks all minty fresh. I ordered some LCA bolts from Bolts Bolts but they didnt wana go into the lca for some reason :S So i ended up using my old bolts..
So next day gave it a wash >
Snow Foam dat hoe
Some pics eddicus took which i re-edited a bit! Sorry dude if i messed em up haha
VOF getting mad Love! (we were tegiwa bashing at this moment
)
Clean RPF1's thanks to Billberry and a wheel brush, so easy to clean inside out. Also can see the new enkei stickers.
My cushions were getting felt up alot this night
Wink Wink! Roarrrr
Whats this?!
Light as ****ing paper
Sexy weavess
Fitted!
Also ordered some Mfactory bushes as my FLP shifter isnt what it used to be. I felt hitmos FLP (inb4 kadir and his gay jokes) and it was so stiff! so once thats done im sure itll shift alot better.
Got my MOT in a weeks time, so got a few things on order!
Where did you get m factory bushes from?
Cars looking well
I got em from a seller on here but you can get them from the main website too
MFactory Competition Products - Forged Transmission Components
You happy with them?
coolkidirish
Member
- Joined
- Jan 8, 2011
- Messages
- 91
great conversion! looks perfect well done
Thanks Mr Cetcivic
Cheers dude! Appreciate it.
Some updates - I really need some professional pictures lol
Well i had my MOT coming up, so i needed..well wanted to get a few things upto standards. Purchased another Toyo T1r for the tyre which had a buldge in it, just to be on the safe side (i need to get some good quality tyres for the front as i keep loosing traction, so if anyone could recommend a brand please
).gif ":)) :))")
-
Got it swapped over
Two random shots, was dirty here but doesnt show in the pictures :S
One showing getting out the driveway..and the kerb mark (hopefully touch that up soon) -
Remember these? -
Got them fitted and wow! Such a big differernce, feels alot more smoother. Defo recommend this if your shifter is loose.
Got my tracking done, feels alot better now! Just need to balance the wheels -
Had to raise the car for MOT..to get it on the rollers..
"Friendly" MOT guy didnt even put it on the rollers lol, so that was a waste. A shot of the LCA's -
Said Bye Bye to this (regretfully) -
And fitted this! -
Wasnt sure at first but i love it! (Pics from ELM convoy) -
Also fitted ek9 Recess -
Also got some Dotch Vtakkk stickers..not fitted yet -
Some Snaps from the ELM Meet -
Hopefully some EK9 lights next!
